HiLantronics Red Aluminium HLT5000WP 1/5 51kg 8.4v Metal Geared Waterproof Servo w/ Aluminium Servo Horn

Brand: HiLantronics | SKU: HLT5000WP
2 in stock

$263.88

Description

 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Overview

Unbreakable fully billet casing, waterproof *, 15T gear teeth, heavy duty metal gears, quality core metal motor, smart digital signal controller with Led status signals for diagnostic, quick disconnect servo lead, current limiter and over temperature shut down if servo ever got stuck to prevent the controller board from being burnt out, automatic shutdown if no RX signals present.

Features
  • Full CNC Machined Aluminium cashing
  • Waterproof design
  • LED status lights for diagnostics
  • Quick disconnect servo lead
  • Incorporates a current limiter function
  • Casing is anodised in Red
  • Manufactured in Australia
  • Genuine HiLantronics product
  • LED Signal Status

    • Green Flashing: No Radio Signal / Inactive
    • Red Flashing: No Radio Signal / Low Battery / Inactive
    • Green ON: Active
    • Red ON: Low Battery voltage (Below 6 Vdc)
    • Red/Green ON: Safe Mode (Current Limited)
Specifications
  • Torque(6.0V): 41 kg-cm (569 oz/in)
  • Torque(7.4V): 45 kg-cm (624 oz/in)
  • Torque(8.4V): 51 kg-cm (708 oz/in)
  • Speed: 0.18 sec (6.0V) │ 0.15 sec (7.4V) | 0.13 sec (8.4V)
  • Operating Voltage:6.0 ~ 7.4 ~ 8.4 DC Volts
  • Weight: 280 g (10.2 oz)
  • Bearing Type:Ball Bearing x 2
  • Motor Type:Brushed Motor
  • Gear Type:Metal

Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.


Servo Specifications
  • Total Height (A) = 69.5mm
  • Body Width (B) = 67mm
  • Below Mount (C) = 44.8mm
  • Above Mount (D) = 24.7mm
  • Total Length (E) = 82mm
  • Total Width (F) = 31mm
RC Hobby Servo Specifications

Included items
Description QTY
Red Aluminium HLT5000WP 1/5 51kg 8.4v Metal Geared Waterproof Servo 1
Aluminium 15T Servo Horn 1
Hardware Set 1
Compatibility
  • Servo requires 3 to 5Vdc square wave pulse. Pulse duration is from 0.9mS to 2.1mS with 1.5mS as center. Servos can be operated within a 6V-8.4V. range. The Black wire is 'ground', the Red wire ( center ) is 'power' and the third wire (white) is 'signal'.
Specifications
Servo
Servo Size: 1/5
Drive Motor Type: Brushed
Gear Material: Metal
Case Material: Aluminium
Waterproof Casing: Yes
Rotational Degrees: 120o (Normal)
Servo Spline Count: 15
Signal Type: Digital
6.0V Torque kg/cm: 51
6.0V Sec/60 Degrees: 0.18
"A" Measurement: 69.5
"B" Measurement: 67
"C" Measurement: 44.8
"D" Measurement: 24.7
"E" Measurement: 82
"F" Measurement: 31
Reviews
HiLantronics Red Aluminium HLT5000WP 1/5 51kg 8.4v Metal Geared Waterproof Servo w/ Aluminium Servo Horn
0 reviews