Hitec Brand: Hitec
SKU: HS-7954SH
In Stock | QTY: 1
Excluding GST: $156.17



The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.


  • G2 Digital Circuit
  • HV Coreless Motor
  • Dual Ball Bearing Supported Output Shaft
  • Steel Gear Train (MK first gear)

Programmable Functions*

  • End Point Adjustments
  • Direction
  • Fail Safe
  • Dead Band
  • Speed (Slower)
  • Overload Protection
  • Resolution
  • Data Save / Load
  • Program Reset

*Select features are only programmable with the HFP-20 field programmer.

  • Total Height (A) = 40mm
  • Body Width (B) = 38mm
  • Below Mount (C) = 24mm
  • Above Mount (D) = 11mm
  • Total Length (E) = 51mm
  • Total Width (F) = 17mm

Servo Size Standard
Servo Spline Count 24
Drive Motor Type Coreless
Waterproof Casing Splash Proof
Gear Material Metal
Torque kg/cm 29
Signal Type Digital
Case Material Plastic,Metal
Rotational Degrees 120o (Normal)
6.0v Sec/60 Degrees 0.15
"A" Measurement 40
"B" Measurement 38
"C" Measurement 24
"D" Measurement 11
"E" Measurement 51
"F" Measurement 17

Write a review

Note: HTML is not translated!
    Bad           Good
Related Products