Kyosho 1/8 Inferno Neo 3.0 VE 4WD Electric Brushless Off Road RC Buggy - Green
Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes worldwide, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle endpoint adjust, dual-rate adjuster, plus a high-torque and high-speed steering servo. Also, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tyres to deliver superior performance on any surface. The Inferno NEO 3.0 VE allows anyone to test the bounds of common sense with powerful brushless motor acceleration.
It shares the same stylish gun metallic anodized finish aluminium parts as Kyosho’s flagship “Inferno MP9”.
KYOSHO SPEED HOUSE TORX8 brushless motor delivers powerful acceleration. The 2-piece motor mount allows easy backlash adjustment and removal of the motor.
KYOSHO SPEED HOUSE BRAINZ8 ESC with electric cooling fan features a 10-item program that allows precision adjustments such as brake, timing advance, cutoff voltage and heat protection.
Large Big Bore resin oil shocks produce excellent surface tracing. High-strength aluminium shock stays deliver full shock absorber performance.
Turnbuckle upper arms and steering tie rod can be adjusted to optimize alignment setting to running conditions.
Included high-torque (KS5031-09MW) steering servo delivers nimble control feel. Features built-in high durability metal gears.
Lowered chassis height in combination with optimal weight balance and big bore shocks realizes high stability running performance.
Equipped with KC Cross Tyres that are designed with a block pattern seen in motocross bikes. Wear-resistant, these tyres deliver exceptional performance on any surface.
High visibility printed body is designed for airborne stability and control and is also pre-cut with decals applied.
- Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
- Full-time 4WD with low C of G 3-diff shaft drive.
- Big Bore oil shocks & 4-wheel independent double-wishbone suspension.
- Full bearing specifications with 18 ball bearings on drive system and suspension.
- Features thick suspension arms with high torsional rigidity.
- A wide variety of optional parts is available to upgrade the chassis.
- Equipped with 1.0 module metal main gear, designed for hard running.
- Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
- Installed with high efficiency and high strength machined metal gears on centre diff. Realizes stable performance even under severe driving conditions.
- Length: 496mm (19.5")
- Width: 307mm (12")
- Height: 189mm (7.44")
- Wheelbase: 323~328mm (12.7~12.9")
- Tread (F/R): 258mm/261mm (10.1 / 10.2")
- Tyre (F/R): φ115×44mm/φ115×44mm (φ4.52x1.73/φ4.52×1.73")
- Gear Ratio: 12.7:1
- Weight: 3,550g (7.82lbs) approx.
- Transmitter: 2.4GHz Syncro KT-231P+
Description | QTY |
---|---|
Factory assembled chassis complete with control linkages | 1 |
Finished body complete with a printed colour scheme | 1 |
2.4GHz Syncro KT-231P+ transmitter | 1 |
1.5、2.0、2.5、3.0mm L shaped hex wrenches | 1 |
Cross wrench | 1 |
17mm wheel wrench | 1 |
Manual
Car | |
---|---|
Assembly Type: | Ready to Run |
Max LiPo Power: | 4S (14.8v) |
Size (Scale): | 1/8 |
Skill Level: | Intermediate |
Power Source: | Electric Brushless |
Chassis Type: | Buggy |
On/Off Road: | Off Road |
Drivetrain: | 4WD |
Factory specs | |
---|---|
Max LiPo power: | |
Battery connector: | |
Front shock oil: | |
Rear shock oil: | Coming Soon |
Front differential oil: | Coming Soon |
Centre differential oil: | Coming Soon |
Rear differential oil: | Coming Soon |
Pinion gear: | Coming Soon |
Spur gear: | Coming Soon |
Wheel hex size: | 17 |