Savox Standard 36kg 7.4v Coreless Digital Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The Savox SA-1230SG Monster Torque Steel-Gear digital servo is the servo that is ideal for those requiring extra torque, but not using high voltage as a power source.
Extremely strong unique steel gears ensure long-life and durability. Ideal for steering on rock crawlers, monster trucks, and large scale aircraft. Slightly taller case design.
- Operating Temperature: 14° - 122°F (-10° - 50°C)
- Running Current (no load): 180mA @4.8V, 250mA @6.0V
- Stall Current (at locked): 4200mA @4.8V, 5300mA @6.0V
- Idle Current: 5mA @4.8V, 5mA @6.0V
- Wire Length: 200 +/- 5mm
- Output Gear Spline: 25 Tooth
- Bearings: 2BB
- Operating Travel: 100° (1000 → 2000 µ second)
- Neutral Position: 1500 µ second
- Pulse Width Range: 800 → 2200 µ second
- Maximum Travel: Appx 130° (900 → 2100 µ second)
- Refresh Rate: 333 Hz
- Motor Type: Coreless
- Torque @ 4.8v - 30.0kg/416.6oz-in
- Torque @ 6v - 36.0kg/499.9oz-in
- Speed @ 4.8v - 0.20 sec/60 deg
- Speed @ 6v - 0.16 sec/60 deg
- Dimensions L x W x H (mm): 40.3 x 20.2 x 44.9
- Weight: 79.0g
- Total Height (A) = 44.9mm
- Body Width (B) = 40.3mm
- Below Mount (C) = 31.2mm
- Above Mount (D) = 12.8mm
- Total Length (E) = 54mm
- Total Width (F) = 20.2mm
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
| Servo | |
|---|---|
| Servo Size: | Standard |
| Gear Material: | Metal |
| Case Material: | Metal |
| Waterproof Casing: | Splash Proof |
| Rotational Degrees: | 120o (Normal) |
| Servo Spline Count: | 25 |
| Signal Type: | Digital |
| 6.0V Torque kg/cm: | 36 |
| 6.0V Sec/60 Degrees: | 0.11 |
| "A" Measurement: | 44.9 |
| "B" Measurement: | 40.3 |
| "C" Measurement: | 31.2 |
| "D" Measurement: | 12.8 |
| "E" Measurement: | 54 |
| "F" Measurement: | 20.2 |
