Element RC 1/10 Enduro Utron SE 4WD Electric RTR RC Rock Crawler
Inspired by modern Australian utility vehicles (Ute), the Utron SE boasts detailed and realistic-looking features. Made from high-strength polycarbonate, the one-piece body has been pre-painted with a two-tone colour scheme to look fresh out of the paint booth. Details like separately moulded and painted grill, signal lights, and tail lights give the Utron the ultimate scale looks. The front, with integrated winch line routing and rear bumpers, fit snugly against the body for added approach and departure angles and just look awesome! For additional scale realism, the Utron SE comes equipped with a pair of front injection-moulded inner fenders.
The all-new IFS2 has been completely redesigned from the ground up. With zero bump steer, increased suspension travel, linear slider steering rack, improved ground clearance and approach angles on front arms and skid plates, the IFS2 is a huge improvement in both performance and scale looks.
Video
Key Features
New axles with larger input bushings (upgradable to bearings) handle higher loads. New diff covers feature the ability to add weights on the inside to maintain a scale look, and faux disk brakes with calipers add even more scale details.
Providing traction on all four comers are a set of 1.9' Steelie bead lock wheels and 1.9" x 4.19" Pin-tyres.
The water-resistant SC480X brushed ESC is specifically programmed for crawling with proportional forward/reverse, dual auxiliary power output leads, LiPo Iow-voltage cut-off protections, and T-plug connector.
The design moves the motor forward to help keep weight over the front Wheels. This design comes stock with a one-to-one ratio. Rear drive ratio can be adjusted with our optional Factory Team gears.
The all-new IFS2 has been completely redesigned from the ground up. Also with zero bump steer, increased suspension travel, linear slider steering rack, improved ground clearance and approach angles on front arms and skid plates.
New axles with larger input bushings (upgradable to bearings) handle higher loads. New diff covers feature the ability to add weights on the inside to maintain a scale look, and faux disk brakes with calipers add even more scale details.
Just as smooth and reliable as our aluminium shocks, these durable plastic shocks feature caps with a bleeder screw for easy airless bleeding and mini springs for a more scale appearance and to keep the weight low.
- All-new Independent Front Suspension (IFS2) design
- Front injection-moulded inner fenders
- 1.9" Steelie bead lock wheels
- 1.9" x 4.19" PinSeeker tyres
- High clearance front and rear bumpers
- Stamped steel high clearance frame rails
- Enclosed receiver box
- ESC tray for cleaner wiring
- POM-filled injection-moulded pivot balls
- 12.8" wheelbase
- 1-piece polycarbonate Utron SE body
- Adjustable front and rear bumper mounts with integrated winch line routing
- Adjustable width rock sliders
- Adjustable body posts & rear shock mount positions for tuning wheelbase and shock angles
- Telescopic driveshafts front and rear
- One-piece rear axle design
- Plastic Stealth XF upper transmission gears
- Machined steel top shaft
- Wheelbase: 325mm (12.8in)
- Chassis: High-Clearance
- Drivetrain: 4WD
- Suspension: 90mm Coil-Over Shocks
- Gear Ratio: 12:1
- Motor: Brushed
| Description | QTY |
|---|---|
| 1 |
| Car | |
|---|---|
| Assembly Type: | Ready to Run |
| Max LiPo Power: | 3S (11.1v) |
| Size (Scale): | 1/10 |
| Skill Level: | Beginner |
| Power Source: | Electric Brushed |
| Chassis Type: | Rock Crawler |
| On/Off Road: | Off Road |
| Drivetrain: | 4WD |
| Factory specs | |
|---|---|
| Max LiPo power: | |
| Battery connector: | |
| Front shock oil: | |
| Wheel hex size: | 12 |
