HPI SS-20WR 6.5kg 6V Servo
Brand: HPI
|
SKU: 120018
Description
 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Overview
This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles).
How To: Install a Servo
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
Specifications
- Torque(6.0v): 4.2kg-cm (oz-in)
- Torque(7.4v): 6.5kg-cm (oz-in)
- Speed: 0.14 sec (4.8v) | 0.11 sec (6v)
- Operating Voltage: 6v
- Weight: 42g (1.48oz)
- Motor Type: Brushed
- Size: 40.7x39.4x20.0mm (1.60x1.55x0.79in)
Included items
Description | QTY |
---|---|
HPI SS-20WR 6.5kg 6V Servo | 1 |
Specifications
Servo | |
---|---|
Servo Size: | Standard |
Drive Motor Type: | Brushed |
Gear Material: | Plastic |
Case Material: | Plastic |
Waterproof Casing: | Splash Proof |
Rotational Degrees: | 120o (Normal) |
Servo Spline Count: | 25 |
Signal Type: | Digital |
6.0V Torque kg/cm: | 6.5 |
6.0V Sec/60 Degrees: | 0.11 |
"A" Measurement: | |
"B" Measurement: | |
"C" Measurement: | |
"D" Measurement: | |
"E" Measurement: | |
"F" Measurement: |
Reviews
0 reviews
Compatibility
Fits 75 HPI Cars