HPI Standard SS-40WP 10kg Metal Geared Servo
Brand: HPI
|
SKU: 110650
Description
 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
HPI-110650 Servo Specifications
- Total Height (A) = 43.4mm
- Body Width (B) = 40mm
- Below Mount (C) = 24mm
- Above Mount (D) = 16.4mm
- Total Length (E) = 56mm
- Total Width (F) = 19.5mm
Specifications
Servo | |
---|---|
Servo Size: | Standard |
Gear Material: | Metal |
Case Material: | Plastic |
Waterproof Casing: | Yes |
Rotational Degrees: | 120o (Normal) |
Servo Spline Count: | 25 |
Signal Type: | Digital |
6.0V Torque kg/cm: | 10 |
6.0V Sec/60 Degrees: | 0.11 |
"A" Measurement: | 43.4 |
"B" Measurement: | 40 |
"C" Measurement: | 27 |
"D" Measurement: | 16.4 |
"E" Measurement: | 53.5 |
"F" Measurement: | 19.5 |
Reviews
1 reviews
Michael Davenport
11/11/2018
So much better than the stock one in the savage XS. Almost a crime the rubbish one that comes with the RTR. So slow and bugger all torque. This one does the business well
Showing 1 to 1 of 1 (1 Pages)