Savox Orange Aluminium SA-1256TG Plus Standard 20kg 6v Coreless Metal Geared Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Experience the difference with the Savox SA-1256TG Plus servo. This upgrade for RTR servos delivers exceptional performance with flying applications. Minimized backlash translates your control inputs with precision, leading to smooth and accurate flight. Its high torque tackles demanding maneuvers with ease, while robust construction ensures long-lasting durability. Soft Start and Sanwa SSR compatibility further enhances functionality and convenience. Take your RC plane's capabilities to the next level with the SA-1256TG Plus.
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
- Uniquely anodised in orange
- Aluminium Centre case helps protect and keep the servo cool
- Features soft start and Sanwa SSR compatibility
- Features Titanium gearing for enhanced durability while minimising weight gain
- Suitable for aeroplanes
- Minimal backlash makes it a good addition to your RC plane
- Spline size: 25T Spline
- Servo Technology: Digital
- Operating Voltage: 4.8V - 6V
- Motor Type: Coreless Motor
- Weight: 64g
- Gear Type: Titanium Gears
- Refresh Rate: 333 Hz
- Total Height (A) = 37.2mm
- Body Width (B) = 40.3mm
- Below Mount (C) = 24.4mm
- Above Mount (D) = 13.2mm
- Total Length (E) = 54mm
- Total Width (F) = 20.2mm
| Description | QTY |
|---|---|
| Savox SV-1250MG-Plus Micro 8kg 7.4V HV Coreless Metal Geared Servo | 1 |
| Servo | |
|---|---|
| Servo Size: | Standard |
| Drive Motor Type: | Coreless |
| Gear Material: | Titanium |
| Case Material: | Aluminium |
| Waterproof Casing: | No |
| Rotational Degrees: | 120o (Normal) |
| Servo Spline Count: | 25 |
| Signal Type: | Digital |
| 4.8V Torque kg/cm: | 16 |
| 6.0V Torque kg/cm: | 20 |
| 4.8V Sec/60 Degrees: | 0.18 |
| 6.0V Sec/60 Degrees: | 0.15 |
| Input Voltage Range: | 4.8V,6V |
| "A" Measurement: | 37.2 |
| "B" Measurement: | 40.3 |
| "C" Measurement: | 24.4 |
| "D" Measurement: | 13.2 |
| "E" Measurement: | 54 |
| "F" Measurement: | 20.2 |
