Savox SW-2210SG Standard 45kg 8.4V Metal Geared Waterproof Servo

Brand: Savox | SKU: SW-2210SG
Savox
1 in stock
$185.00
Description

 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Overview

This waterproof, steel-geared servo is perfect for Monster Truck and most Scaler and Crawler applications where a slightly taller servo can be fitted. Precision steel gears, stump-pulling torque, and waterproof to IP67 standards (operates for up to 30 minutes in water up to 3 feet deep).

Features

  • Center aluminum with nylon composite top and bottom case
  • Operates directly on 7.4v without the need for an eternal BEC
  • Precision ball bearings

SAV-SW-2210SG Servo Specifications
  • Total Height (A) = 46mm
  • Body Width (B) = 40.6mm
  • Below Mount (C) = 29.2mm
  • Above Mount (D) = 16.8mm
  • Total Length (E) = 54mm
  • Total Width (F) = 20.7mm
Specifications
Servo
Servo Size: Standard
Drive Motor Type: Brushless
Gear Material: Steel
Case Material: Metal
Waterproof Casing: Yes
Rotational Degrees: 120o (Normal)
Servo Spline Count: 25
Signal Type: Digital
7.4V Torque kg/cm: 40
8.4V Torque kg/cm: 45
7.4V Sec/60 Degrees: 0.11
8.4V Sec/60 Degrees: 0.1
Input Voltage Range: 7.4V,8.4V
"A" Measurement: 46
"B" Measurement: 40.6
"C" Measurement: 29.2
"D" Measurement: 16.8
"E" Measurement: 54
"F" Measurement: 20.7
Reviews
Savox SW-2210SG Standard 45kg 8.4V Metal Geared Waterproof Servo
0 reviews