Spektrum S652 Standard 19kg 7.2V Brushless Steel Geared Waterproof Servo
 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
This 18Kg Servo Steel Gear is compatible with the Arrma 1/7 Mojave Desert Truck, 1/7 Infraction 6S BLX Street Bash, 1/7 Felony 6S BLX Muscle Car, 1/8 Typhon 6S V5 BLX Buggy, 1/8 Kraton 6S V5 Monster Truck and the 1/8 Notorious 6S V5 Stunt Truck.
- Replaces the ADS-15M Servo
- Made with steel gears for improved durability
- Waterproof design
- Torque(6.0V): 16.49 kg-cm (229 oz/in)
- Torque(7.4V): 18.94 kg-cm (263 oz/in)
- Speed: 0.227 sec (6V) │ 0.184 sec (7.2V)
- Operating Voltage:6V/7.2V
- Weight: 62g (2.18 oz)
- Bearing Type:
- Motor Type:Brushless
- Gear Type:Steel
- Size:40.1 x 20.0 x 39.4 mm (1.58 x .79 x 1.55 in)
Servo Dimensions
- Total Height (A) = 43.21mm
- Body Width (B) = 40.45mm
- Below Mount (C) = 27mm
- Above Mount (D) = 16.21mm
- Total Length (E) = 54mm
- Total Width (F) = 19.9mm
- The S652 uses 23 Tooth servo horns
Servo | |
---|---|
Servo Size: | Standard |
Drive Motor Type: | Brushless |
Gear Material: | Steel |
Case Material: | Metal,Plastic |
Waterproof Casing: | Yes |
Servo Spline Count: | 23 |
Signal Type: | Digital |
6.0V Torque kg/cm: | 16.49 |
6.0V Sec/60 Degrees: | .227 |
"A" Measurement: | 43.21 |
"B" Measurement: | 40.45 |
"C" Measurement: | 27 |
"D" Measurement: | 16.21 |
"E" Measurement: | 54 |
"F" Measurement: | 19.9 |