Futaba S-C400 8kg 7.4V S.Bus Low Profile Coreless Metal Geared Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Upgrade your 1/10 touring car or buggy with the Futaba S-C400 Low Profile Digital Servo. This servo boasts a compact design for easy installation, powerful coreless motor technology, S.BUS compatibility, UR/SR support, and durable metal gears for reliable performance under demanding conditions.
- Low profile design for touring cars and buggies with tight space requirements
- Powerful and responsive coreless motor
- S.BUS compatibility for modern setups
- Supports UR and SR Modes
- Durable metal gears for longevity
- Genuine Futaba product
- Torque (6.0V): N/A
- Torque (7.4V): 8.0 kg-cm (111.2 oz-in)
- Torque (8.2V): N/A
- Speed: 0.08sec/60° @ 7.4 volts
- Weight: 43 grams (1.52 oz)
- Operating Voltage: N/A
- Bearing Type: N/A
- Motor Type: Coreless
- Operating Temperature: N/A
- Refresh Rate: N/A
- Total Height (A) = N/A
- Body Width (B) = 45 mm
- Below Mount (C) = 16 mm
- Above Mount (D) = 9.4 mm
- Total Length (E) = 54.5 mm
- Total Width (F) = 18 mm
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
| Description | QTY |
|---|---|
| Futaba S-C400 8kg 7.4V S.Bus Low Profile Coreless Metal Geared Servo | 1 |
| Servo | |
|---|---|
| 6.8V Sec/60 Degrees: | |
| 6.8V Torque kg/cm: | |
| Servo Size: | Low Profile |
| Drive Motor Type: | Coreless |
| Gear Material: | Aluminium |
| Case Material: | Plastic |
| Waterproof Casing: | No |
| Rotational Degrees: | 120o (Normal) |
| Servo Spline Count: | 25 |
| Signal Type: | Digital |
| 4.8V Torque kg/cm: | |
| 6.0V Torque kg/cm: | 6.6 |
| 7.4V Torque kg/cm: | 8 |
| 8.4V Torque kg/cm: | |
| 11V Torque kg/cm: | |
| 12V Torque kg/cm: | |
| 4.8V Sec/60 Degrees: | |
| 6.0V Sec/60 Degrees: | 0.10 |
| 7.4V Sec/60 Degrees: | 0.18 |
| 8.4V Sec/60 Degrees: | |
| 11V Sec/60 Degrees: | |
| 12V Sec/60 Degrees: | |
| Input Voltage Range: | 6.0V,7.4V |
| "A" Measurement: | |
| "B" Measurement: | 45 |
| "C" Measurement: | 16 |
| "D" Measurement: | 9.4 |
| "E" Measurement: | 54.5 |
| "F" Measurement: | 18 |
