HPI SS-20WR 6.5kg 6V Servo
HPI SS-20WR 6.5kg 6V Servo
Water-resistant 6.5kg servo built for bashers and racers in wet conditions.
- Water-resistant design for use in rain, snow, and puddles
- 6.5kg-cm torque at 7.4v for strong steering authority
- Brushed motor construction
- Compatible with standard servo mounts
The HPI SS-20WR is a water-resistant servo ideal for bashers and racers who need a tough, durable servo that performs reliably in wet conditions such as rain, snow, and puddles.
- 1x HPI SS-20WR 6.5kg 6V Servo
Servos are powered by the ESC's output to the receiver. If you are using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience brown-outs where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver to smooth the current delivery. In some cases you may need to install an external BEC.
-
Torque (6.0v)
- 4.2kg-cm
-
Torque (7.4v)
- 6.5kg-cm
-
Speed
- 0.14 sec (4.8v) | 0.11 sec (6v)
-
Operating Voltage
- 6v
-
Weight
- 42g (1.48oz)
-
Motor Type
- Brushed
-
Size
- 40.7 x 39.4 x 20.0mm (1.60 x 1.55 x 0.79in)
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Plastic
-
Waterproof Casing
- Splash Proof
-
Servo Spline Count
- 25Tooth
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 6.5
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.11
-
Signal Type
- Digital
-
Drive Motor Type
- Brushed
-
Case Material
- Plastic
-
Rotational Degrees
- 120° (Normal)