Savox Black Edition Monster Torque Standard 70kg 8.4V HV Brushless Metal Geared Servo
Savox Black Edition Monster Torque Standard 70kg 8.4V HV Brushless Metal Geared Servo
Servos are powered by the ESC's output to the receiver. If you're using A higher-strength Servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging A Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The powerful "Monster" performance series from Savox utilize an all Aluminum Case, Unique brushless motor and controller technology to boost power up to 35% over previous generation servos.
Full Aluminum Case
3 Precision Ball Bearings.
Unique steel gears
Torque @ 6v - 40.0kg/555.5oz-in
Torque @ 7.4v - 50.0kg/694.4oz-in
Torque @ 8.4v - 65.0kg/902.7oz-in
Speed @ 6v - 0.16 sec/60 deg
Speed @ 7.4v - 0.13 sec/60 deg
Speed @ 8.4v - 0.11 sec/60 deg
Dimensions L x W x H (mm): 40.3 x 20.2 x 38.7
Weight: 81g
SAV-SB-2290SG Servo Specifications
Total Height (A) = 38.7mm
Body Width (B) = 40.3mm
Below Mount (C) = 25.9mm
Above Mount (D) = 11.7mm
Total Length (E) = 54mm
Total Width (F) = 20.2mm
-
Height (A)
- 38.7mm
-
Body Length (B)
- 40.3mm
-
Bottom to Under Mount (C)
- 25.9mm
-
Top to Under Mount (D)
- 11.7mm
-
Length (E)
- 54mm
-
Width (F)
- 20.2mm
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Metal
-
Waterproof Casing
- No
-
Servo Spline Count
- 25Tooth
-
Input Voltage Range
- 6VV, 7.4VV, 8.4VV
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 45
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.16
-
7.4V Torque kg/cm
- 55
-
7.4V Sec/60 Degrees
- 0.13
-
8.4V Torque kg/cm
- 70
-
8.4V Sec/60 Degrees
- 0.11
-
Signal Type
- Digital
-
Drive Motor Type
- Brushless
-
Case Material
- Metal
-
Rotational Degrees
- 120° (Normal)
