Power HD T50 50KG 8.4V Brushless Metal Geared Standard Servo
Videos
Power HD T50 50KG 8.4V Brushless Metal Geared Standard Servo
Power HD T50 50kg 8.4V brushless servo with all-aluminium housing and ST32-bit MCU. Ideal for 1/8th nitro off-road.
- 50kg torque at 8.4v
- High-power brushless motor
- All-aluminium housing
- ST32-bit MCU control chip
- Ideal for 1/8th nitro off-road
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The Power HD T50 High Voltage Servo features all-aluminium housings, with high-power brushless motor as the core power, offering amazing torque output. American imported ST32-bit MCU control chip ensure superior servo performance. The T50 is ideal for 1/8th nitro off-road.
If you need something bigger, the T70 is ideal for large truggy, rock crawler and 1/5th scale cars.
Performance
- Operating Voltage: 6.0v / 7.4v / 8.4v
- Torque: 39.0 kg-cm (541.6 oz/in) at 6.0v / 40.0 kg-cm (555.5 oz/in) at 7.4v / 50.0 kg-cm (694.4 oz/in) at 8.4v
- Speed: 0.092 sec at 6.0v / 0.074 sec at 7.4v / 0.065 sec at 8.4v
- Bearing Type: Ball Bearing x 2
- Motor Type: Brushless Motor
- Gear Type: Steel
- Working Frequency: 1520µs / 333hz
- Operating Temperature: -20°~60°
- Weight: 83 g (2.93 oz)
- Size: 40.7 x 20.5 x 38.7 mm (1.60 x 0.81 x 1.52 in)
Dimensions
- Total Height (A): 43.5mm
- Body Width (B): 41mm
- Below Mount (C): 27.5mm
- Above Mount (D): 16.0mm
- Total Length (E): 54.0mm
- Total Width (F): 20mm
-
Height (A)
- 43.5mm
-
Body Length (B)
- 41mm
-
Bottom to Under Mount (C)
- 27.5mm
-
Top to Under Mount (D)
- 16mm
-
Length (E)
- 54mm
-
Width (F)
- 20mm
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Steel
-
Waterproof Casing
- Yes
-
Servo Spline Count
- 25Tooth
-
Input Voltage Range
- 6V, 7.4V, 8.4V
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 39
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.092
-
7.4V Torque kg/cm
- 40
-
7.4V Sec/60 Degrees
- 0.074
-
8.4V Torque kg/cm
- 50
-
8.4V Sec/60 Degrees
- 0.065
-
Signal Type
- Digital
-
Drive Motor Type
- Brushless
-
Case Material
- Aluminium
-
Rotational Degrees
- 180°
5 out of 5 stars
5 out of 5 stars
