Power HD Standard 1812MG 18kg Metal Geared Waterproof Servo
Power HD Standard 1812MG 18kg Metal Geared Waterproof Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Power HD 1812MG Servo SpecificationsTotal Height (A) = 43.5mm
Body Width (B) = 40.6mm
Below Mount (C) = 26.5mm
Above Mount (D) = 17mm
Total Length (E) = 54.3mm
Total Width (F) = 20mm
Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.
-
Height (A)
- 43.5mm
-
Body Length (B)
- 40.6mm
-
Bottom to Under Mount (C)
- 26.5mm
-
Top to Under Mount (D)
- 17mm
-
Length (E)
- 54.3mm
-
Width (F)
- 20mm
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Metal
-
Waterproof Casing
- Yes
-
Servo Spline Count
- 25Tooth
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 18
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.12
-
Signal Type
- Digital
-
Drive Motor Type
- Brushed
-
Case Material
- Plastic
-
Rotational Degrees
- 120° (Normal)
5 out of 5 stars
5 out of 5 stars
5 out of 5 stars
3 out of 5 stars






