Power HD Standard LW-25MG 25kg 7.4v Metal Geared Waterproof Servo
Power HD Standard LW-25MG 25kg 7.4v Metal Geared Waterproof Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
If fitted to a Traxxas TRX-4/6, it is unlikely the stock electronics will be able to support the increased power demands of this servo. It is strongly recommended to use an external BEC.
Power HD LW-25MG Servo Specifications
- Total Height (A) = 44mm
- Body Width (B) = 41mm
- Below Mount (C) = 28mm
- Above Mount (D) = 16mm
- Total Length (E) = 54mm
- Total Width (F) = 20.5mm
Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.
-
Total Width
- 20.5mm
-
Servo Spline Count
- 25Tooth
-
Top to Under Mount
- 16mm
-
Total Length
- 54mm
-
Body Length
- 41mm
-
Bottom to Under Mount
- 28mm
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.16
-
Total Height
- 44mm
-
Signal Type
- Digital
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 25
-
Gear Material
- Metal
-
Waterproof Casing
- Yes
-
SizeConventionally sized servo names
- Standard
Parts
1 out of 5 stars
2 out of 5 stars
3 out of 5 stars
4 out of 5 stars
5 out of 5 stars
5 out of 5 stars








































