NiMH

1. Identify your connector from the connector list below
2. Then, on the prodcut page choose the desired connector before adding it to your cart

Connector list:

• Deans
• Traxxas (Non iD)

  This connector works with newer iD connectors but disables the iD functionality

• Tamiya
• Mini Tamiya
• XT90
• XT60
• XT30
• EC5
• EC3
• EC2
• JST
• Futaba J

Still unsure? Contact us.

To get more run time, buy a battery with more mAh. You can think of the mAh as a fuel tank in a petrol car, upgrading from a 25L tank to a 50L tank will double your run time but you won't see any performance increase.

The run time also greatly depends on the amount of load on the motor. Just like your real car, if you're heavy on the accelerator you'll run out of fuel quicker. There's many other factors that will change the amount of load on your electronics such as:

• Wheel size, material, weight and tread pattern
• Gearing
• Driving style
• Terrain
• Drivetrain efficiency
• Aerodynamics

NiMH and LiPo are types of batteries. If you want a high-performance setup, go LiPo. If you're not too fussed about speed NiMH would be the better option as they are safer and require less 'special attention'.

Also, it makes a lot of sense to get a LiPo battery if you have a brushless powered car and to get a NiMH battery if you have a brushed powered car.

Learn more about LiPo and NiMH batteries.

To get more power, you simply buy a battery with more voltage. However, you need to ensure your vehicle and it's electronics can handle the extra power to avoid damage.

Typically you can find this information in your user's manual, if you're unsure just ask us - never guess!

It's not too uncommon that to install a battery with more voltage that you need to modify the RC car in someway, this may include installing a different motor gear, cooling fan and even change your driving style.

The charge time can be calculated by dividing the battery's mAh by the mA output of your charger.

For example, let's say we have a 7.4v 5,400mAh LiPo battery and we're charging it on the G.T Power B3 charger which has an output of 1.5A (1,500mAh) - Tip: the charger's output in A (amps) or mA (milliamps) will be per hour. The calculation will look like this: 5,400/1,500 = 3.6 hours (which is 3 hours and 36 minutes).

We list each battery's length, width and height in the specifications tab in its product page. It's your responsibility to measure your battery compartment to ensure proper fitment.

Want an easier way? No worries, use our parts finder and it will display only batteries that will pysically fit and work with your RC car