Power HD Storm S50 Standard Brushless 50kg 8.4v Metal Geared Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
- Torque(6.0V): 38.0 kg-cm ( 527.7 oz/in)
- Torque(7.4V): 45.0 kg-cm ( 624.9 oz/in)
- Torque(8.4V): 50.0 kg-cm ( 694.4 oz/in)
- Speed: 0.15 sec (6.0V) ?0.12 sec (7.4V) ?
- Speed: 0.10 sec (8.4V) ?
- Operating Voltage?6.0 ~ 8.4 DC Volt
- Weight: 75.0 g (2.65 oz)
- Bearing Type?Ball Bearing x 2
- Motor Type?Brushless Motor
- Gear Type?Titanium & Steel
- Operating Temperature: -20?~60?
- Working frequence?1520?s / 333hz
- Size?40.7 x 20.5 x 38.6 mm ( 1.60 x 0.81 x 1.52 in)
| Description | QTY |
|---|---|
| Storm S50 Standard Brushless 50kg 8.4v Metal Geared Servo | 1 |
| Hardware Set | 1 |
| Decal Sheet | 1 |
- Total Height (A) = 44mm
- Body Width (B) = 40.7mm
- Below Mount (C) = 29mm
- Above Mount (D) = 15mm
- Total Length (E) = 54.2mm
- Total Width (F) = 20mm
Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.
| Servo | |
|---|---|
| Size: | Standard |
| 6.0v Speed: | 0.15s |
| 6.0v Torque: | 50kg |
| Servo Spline Count: | 25tooth |
| Gear Material: | Titanium & Steel |
| Waterproof Casing: | Yes |
| Signal Type: | Digital |
| Drive Motor Type: | Brushless |
| Case Material: | Metal |
| Total Height: | 44mm |
| Body Length: | 40.7mm |
| Bottom to Under Mount: | 29mm |
| Top to Under Mount: | 15mm |
| Total Length: | 54.2mm |
| Total Width: | 20mm |
1 out of 5 stars
2 out of 5 stars
3 out of 5 stars
4 out of 5 stars
5 out of 5 stars
5 out of 5 stars
Best servo I've ever owned! I would highly recommend this servo to anyone that is sick & tired of busting cheap servos. Very strong & very quick. Very impressive even running on 6.0v. I have all my servos running on 7.4v now so it is even better. Super quiet being brushless & very smooth not jittery at all.
