Futaba Standard S-U301 S-Bus2 3.9kg 7.4V Servo

Brand: Futaba | SKU: S-U301
Futaba
1 in stock
$43.35
Description

 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Overview

Standard Digital and S.Bus2 Capable Servo with Accessory Pack.

Features
  • Compatible with a wide range of genres such as aeroplanes, helicopters, and cars.
  • Resin Gearing.
  • High voltage 7.9KG S.Bus servo.
Specifications
  • Torque(6.6V): 3.5 kg-cm (48.6 oz/in)
  • Torque(7.4V): 3.9 kg-cm (54.2 oz/in)
  • Speed: 0.18 sec (6.0V) │ 0.16 sec (7.4V)
  • Operating Voltage：6.0 ~ 8.4V DC Volts
  • Weight: 39 g (1.38 oz)
  • Gear Type：Resin
Servo Dimension Specifications

Servo Dimensions

  • Total Height (A) = 36.1mm
  • Body Width (B) = 40.5mm
  • Below Mount (C) = 26.6mm
  • Above Mount (D) = 9.5mm
  • Total Length (E) = 54.3mm
  • Total Width (F) = 20.6mm

How To: Install a Servo

In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.

Included items
Description QTY
S-U301 S-Bus2 Standard 3.9kg 7.4V Servo 1
Accessory Pack 1
Specifications
Servo
Servo Size: Standard
Drive Motor Type: 3-Pole
Gear Material: Plastic
Case Material: Plastic
Waterproof Casing: No
Servo Spline Count: 25
Signal Type: Digital
6.0V Torque kg/cm: 3.9
6.0V Sec/60 Degrees: 0.18
"A" Measurement: 36.1
"B" Measurement: 40.5
"C" Measurement: 26.6
"D" Measurement: 9.5
"E" Measurement: 54.3
"F" Measurement: 20.6
Reviews
Futaba Standard S-U301 S-Bus2 3.9kg 7.4V Servo
0 reviews