Hitec HS-7950TH Standard 35kg 7.4v Metal Geared Servo

Brand: Hitec | SKU: HRC37950S
Hitec
2 in stock
$200.24
Description

 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Overview
The HS-7950TH has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 403 oz./in. of torque at 6.0 volts, while still maintaining a respectable 0.15 second transit time.

Features

  • G2 Digital Circuit
  • Titanium Gear Train (MK first gear)
  • Ultra Performance Coreless Motor
  • Heatsink Case
  • (8) O-Rings for Water/Dust/Fuel protection
  • Dual Ball Bearing Supported Output Shaft
Programmable Functions
  • End Point Adjustments
  • Direction
  • Fail Safe
  • Dead Band
  • Speed (Slower)
  • Overload Protection
  • Resolution
  • Data Save / Load
  • Program Reset

*These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.

Specifications
  • Total Height (A) = 40mm
  • Body Width (B) = 38mm
  • Below Mount (C) = 24mm
  • Above Mount (D) = 11mm
  • Total Length (E) = 51mm
  • Total Width (F) = 17mm
Specifications
Servo
Servo Size: Standard
Drive Motor Type: Coreless
Gear Material: Titanium
Case Material: Plastic,Metal
Waterproof Casing: Splash Proof
Rotational Degrees: 120o (Normal)
Servo Spline Count: 24
Signal Type: Digital
6.0V Torque kg/cm: 35
6.0V Sec/60 Degrees: 0.15
"A" Measurement: 40
"B" Measurement: 38
"C" Measurement: 24
"D" Measurement: 11
"E" Measurement: 51
"F" Measurement: 17
Reviews
Hitec HS-7950TH Standard 35kg 7.4v Metal Geared Servo
0 reviews