Hitec HS-7955TG Standard 24kg Metal Geared Servo

Brand: Hitec | SKU: HRC37955S
1 in stock

$192.64

Description

 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Overview

Hitec's best servo just got better. Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of our G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333 oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.

Features

  • G2 Digital Circuit
  • Coreless Motor
  • Dual Ball Bearing Supported Output Shaft
  • Titanium Gear Train (MK first gear)

Programmable Functions

  • End Point Adjustments
  • Direction
  • Fail Safe
  • Dead Band
  • Speed (Slower)
  • Overload Protection
  • Resolution
  • Data Save / Load
  • Program Reset

Specifications
  • Total Height (A) = 40mm
  • Body Width (B) = 38mm
  • Below Mount (C) = 24mm
  • Above Mount (D) = 11mm
  • Total Length (E) = 51mm
  • Total Width (F) = 17mm
Specifications
Servo
Servo Size: Standard
Drive Motor Type: Coreless
Gear Material: Titanium
Case Material: Plastic,Metal
Waterproof Casing: Splash Proof
Rotational Degrees: 120o (Normal)
Servo Spline Count: 24
Signal Type: Digital
6.0V Torque kg/cm: 24
6.0V Sec/60 Degrees: 0.15
"A" Measurement: 40
"B" Measurement: 38
"C" Measurement: 24
"D" Measurement: 11
"E" Measurement: 51
"F" Measurement: 17
Reviews
Hitec HS-7955TG Standard 24kg Metal Geared Servo
0 reviews