Hobbywing XeRun XR8 Plus 4274SD 2250Kv G3 Sensored Brushless Motor & 150A ESC Combo

Xerun 1/8th Competition G3 Motor & ESC Combo

Efficient Design Reduces Running Temperature

With an optimised motor structure the efficiency is improved by more than 6% and reduces the running temperature under load.

Sensored Motor

The motor sensor system adopts patented technology of "error-free" Hall sensor technology, with an independent high-speed and high-precision encoder of which will always output a pure and accurate rotor position signal, which will isolate any external interference which are known to cause errors of the sensor signal.This accurate sensor system will allow the motor to function at its peak performance in a very stable sensor state.

Low RPM (no current) Torque

The motor minimises the cogging & small toque pulses at low rpm (no current effect). Creating smoother performance at low speeds.

Excellent dust-proof design.

The motor is rated for IP5X with a dustproof design to minimise debris entering the motor.

Xerun 4274 SD G3 Motor

• Turbo Timing Technology
• Full Sensored mode (when paired with XR8 ESC series)
• Adjustable Timing (Bi-Directional) 20-40 degrees
• Advanced Hall Sensor System
• 4-pole-8-magnet "Staggered Pole" rotor - HOBBYWING Patented design
• Guarantees users effective heat dissipation and dust-prevention
• The use of double insulated windings (240°C R-rated), NMB bearings from Japan, and the high-intensity adhesive (340°C) guarantees users outstanding performance and super durability
• Best application: 1/8th Monster Truck, SCT, Buggy, Truck, and Touring Car

Specifications

• Kv: 2250Kv
• Pole: 4
• LiPo: 2-6S (7.4V - 22.2V)
• No Load Current: 5.4A
• Size O.Dia / Length: 42 / 74mm
• Weight: 354g (12.4 oz)
• Vehicles: 1/8

XR8 Pro 150A ESC

• Super built-in BEC with the peak output current of up to 15A and switchable output voltage of 6V/7.2V
• Advanced electronic switch with the lifespan of over 50000 times of switching on & off
• High-efficiency heat-dissipating system
• Special dynamic timing control program is available when this ESC runs in full-sensored mode
• Innovative coasting function (patent pending)
• ESC customization by a LCD program box (Purchase separately) or OTA programmer (Purchase separately)

Specifications

• Cont./Peak Current: 150A/950A
• Motor Type: Sensored / Sensorless Brushless Motor
• Main Applications: 1/8th Scale On-road, Buggy, Truggy for High-level Races
• Motor Limit: 6S LiPo/12S NiMH: 4268/4274 Size Motor，KV≤3000;
• LiPo/NiMH Cells: 6-12 Cells NiMH，2-4S LiPo
• BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
• Cooling Fan: Powered by the stable BEC output voltage of 6V/7.2V
• Size/Weight: 58.7(L) x 48(W) x 36.9(H) / 127g (W/O Wires)
• Programming Port: FAN/PRG Port
• ESC programming: LCD Program box, WiFi module enabled