Savox Blue Aluminium 8kg 8.4v Mini Metal Geared Waterproof Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The SW-1250MG Plus is a top-of-the-line waterproof, ultra-torque digital mini servo specifically designed as the ultimate upgrade for Traxxas 1/16 scale applications. Its inclusion in the "Plus" series elevates its capabilities with the addition of Soft Start for smoother operation and Sanwa SSR compatibility for expanded compatibility.
- The metal gearing provides incredible strength and longevity
- The full aluminium design helps provide a high level of protection and assists in keeping the servo cool
- Plus series includes Soft start and Sanwa SSR compatibility
- Ideal as a replacement for Traxxas 1/16 RC vehicles
- Spline size: 25T
- Servo Technology: Digital
- Operating Voltage: 6V - 8.4V
- Motor Type: Coreless
- Weight: 29.6g
- Gear Type: Metal Gears
- Refresh Rate: N/A
- Servo Case: Plastic
- Torque @ 6V: 5 kg-cm (69.4 oz-in)
- Torque @ 7.4V: 8 kg-cm (111.1 oz-in)
- Torque @ 8.4V: 10 kg-cm (138.9 oz-in)
- Speed @ 6V: 0.12 sec/60 deg
- Speed @ 7.4V: 0.10 sec/60 deg
- Speed @ 8.4V : 0.08 sec/60 deg
- Connector type: JR/Futaba
- Total Height (A) = 36.85mm
- Body Width (B) = 29.5mm
- Below Mount (C) = 23.85mm
- Above Mount (D) = 13mm
- Total Length (E) = 40mm
- Total Width (F) = 15mm
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
| Description | QTY |
|---|---|
| Savox Blue Aluminium 8kg 8.4v Mini Metal Geared Waterproof Servo | 1 |
| Servo | |
|---|---|
| Servo Size: | Mini |
| Drive Motor Type: | Coreless |
| Gear Material: | Metal |
| Case Material: | Metal |
| Waterproof Casing: | Yes |
| Rotational Degrees: | 120o (Normal) |
| Servo Spline Count: | 25 |
| Signal Type: | Digital |
| 6.0V Torque kg/cm: | 5 |
| 7.4V Torque kg/cm: | 8 |
| 8.4V Torque kg/cm: | 10 |
| 6.0V Sec/60 Degrees: | 0.12 |
| 7.4V Sec/60 Degrees: | 0.10 |
| 8.4V Sec/60 Degrees: | 0.08 |
| Input Voltage Range: | 6V, 7.4V, 8.4V |
| "A" Measurement: | 36.85 |
| "B" Measurement: | 29.5 |
| "C" Measurement: | 23.85 |
| "D" Measurement: | 13 |
| "E" Measurement: | 40 |
| "F" Measurement: | 15 |
