Savox Orange Aluminium 12kg 6V Standard Plus Titanium Geared Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The SA-1258TG Plus servo delivers exceptional torque and minimised backlash, making it ideal for RC plane enthusiasts seeking precise control of flying surfaces. Its "Plus" series features enhance its capabilities with Soft Start for smoother operation and Sanwa SSR compatibility for expanded compatibility.
- Fitted with Titanium gearing for the utmost strength and durability while maintaining minimal weight gain
- The aluminium middle case helps provide a high level of protection and assists in keeping the servo cool
- Plus series includes Soft start and Sanwa SSR compatibility
- Suitable for RC planes
- Spline size: 25T
- Servo Technology: Digital
- Operating Voltage: 4.8V - 6V
- Motor Type: Coreless
- Weight: 64g
- Gear Type: Titanium Gears
- Refresh Rate: 333 Hz
- Servo Case: Aluminium Centre Case w/ Plastic Top & Bottom
- Torque @ 4.8V: 9.6 kg-cm (133.3 oz-in)
- Torque @ 6V: 12 kg-cm (166.6 oz-in)
- Speed @ 4.8V: 0.10 sec/60 deg
- Speed @ 6V: 0.08 sec/60 deg
- Connector type: JR/Futaba
- Total Height (A) = 41.2mm
- Body Width (B) = 40.3mm
- Below Mount (C) = 24.4mm
- Above Mount (D) = 12.8mm
- Total Length (E) = 54mm
- Total Width (F) = 20.2mm
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
| Description | QTY |
|---|---|
| Savox Orange Aluminium 12kg 6V Standard Plus Titanium Geared Servo | 1 |
| Servo | |
|---|---|
| Servo Size: | Standard |
| Drive Motor Type: | Coreless |
| Gear Material: | Titanium & Aluminium |
| Case Material: | Metal |
| Waterproof Casing: | No |
| Rotational Degrees: | 120o (Normal) |
| Servo Spline Count: | 25 |
| Signal Type: | Digital |
| 6.0V Torque kg/cm: | 12 |
| 6.0V Sec/60 Degrees: | 0.08 |
| "A" Measurement: | 41.2 |
| "B" Measurement: | 40.3 |
| "C" Measurement: | 24.4 |
| "D" Measurement: | 12.8 |
| "E" Measurement: | 54 |
| "F" Measurement: | 20.2 |
