Tamiya 1/10 TT-02 Subaru Impreza WRC Monte Carlo '99 Electric RC Rally Car Kit w/o ESC

'99 Monte Carlo Subaru Impreza WRC

The 1999 version of the two-door Subaru Impreza rally car was a highly balanced beast, with 4-cylinder turbocharged all-aluminium boxer engine, a drive-by-wire throttle and semi-automatic 6-speed transmission. This R/C model assembly kit recreates the Impreza from the year's opening rally in Monte-Carlo, with the form faithfully depicted in durable polycarbonate, and separate parts used to recreate the rear wing and side mirrors. Stickers are included to recreate the multitude of team and sponsor logos. The model runs on the adaptable TT-02 chassis, which is equally at home on road and flat dirt surfaces.

4WD Shaft-Driven TT-02 Chassis

The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gold colour fin-spoke wheels are paired with rally block tyres.

The Gearbox cover can be removed by simply loosening screws on the frame.

Resin ball links in the steering linkage joints make for smooth, comfortable motion.

The Wheel hubs are designed to look like brake discs.

A case is included to keep the all-important receiver protected from dust and dirt.

The Motor cover includes a removable cooling duct (not attached in above image).

• Highly Detailed 1/10 1999 Subaru Impreza WRC Clear Body
• Super Tough Bathtub Type Chassis
• Balance Longitudinal Chassis Layout
• Adjustable Wheelbase
• Shaft-Driven 4WD System
• Front/Rear 4 Bevel Resin Differentials
• 3-Piece Steering Tie-Rod System for Superior Handling
• 4-Wheel Double Wishbone Suspension
• Front/Rear Friction Dampers
• Powerful Brushed 540 motor

• Scale: 1/10
• Length: 442mm (17.4")
• Width: 186mm (7.32")
• Height: 140mm (5.51")
• Wheelbase: 257mm (10.1")
• Body Shell: Clear Polycarbonate
• Chassis Type: TT-02
• Construction Type: Kit
• Motor: 540-Brushed Type
• Electronic Speed Control (ESC): Not Included
• Wheel Drive: 4WD
• Gear Ratio: 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions)
• Shocks: Friction Front & Rear
• Suspension: Fully independent double wishbone
• Terrain Use: On & Off Road

• 7.2V NiMH Battery & Compatible Charger
• Standard Sized Servo
• Electronic Speed Controller (ESC)
• 2Ch Transmitter & Receiver
• Tamiya PS Paint