Traxxas Power Cell 7.4v 5000Mah 25C iD LiPo Battery
LiPo Charging: Always use a LiPo compatible charger when charging your Lithium Polymer (LiPo) batteries. Be sure to select the correct chemistry/setting for the LiPo battery you are charging, as charging on the wrong setting can cause violent fires if left unattended. Please use extreme caution and never charge LiPo batteries unattended. We also recommend using a LiPo Safe/Protection Bag while charging your LiPo batteries.
This Traxxas 5000mah 7.4v LiPo battery with Traxxas' patented iD plug is the best option for those who have any of the traxxas 1/10 scale cars and are wanting a LiPo that is compatible with the new iD charging system. Simply grab two of these iD batteries to run a powerful setup in the Traxxas E-Revo, 1/10 Summit, E-Maxx or even Spartan/M41 Widebody.
Power Cell LiPo packs are engineered to give the punch and on-demand power to reach the top speeds. Traxxas models are built to achieve. Premium LiPo cells are developed specifically for Traxxas, featuring oversized discharge tabs for maximum efficiency. The cells have 12-gauge Maxx® cable soldered straight onto them, eliminating the resistance and loss of power associated with plug-in wires.
With Traxxas' new iD battery connector, charging your LiPo battery has never been easier. The balance wires are built into the connector, and when connected to an iD compatible Traxxas charger, will automatically detect and start charging at the optimal settings.
Please Note: Only compatible with a Traxxas iD capable charger.
|Discharge C Rating:||25|
|Connector Type:||Traxxas iD|
|Battery Length (mm):||137|
|Battery Width (mm):||43|
|Battery Height (mm):||24|
|Battery Weight (g):||281|
|Main Connector Wire Gauge (AWG):||12|
|Lithium Case:||Soft Case|
|Balance Lead Connector:||iD|