TXMS100-B | GPM Blue Aluminium Maxx 4S Wide Suspension & Drive Shaft Kit w/ Hardware

• Made with a quality lightweight high tensile strength aluminum 6061 T6 for greater support and durability.
• Delrin collars are inserted to minimize the gap and strengthen the fitting for a smooth and stable drive.
• The screw fixing method has changed to fixing a pin and with a small screw to avoid any damage by loose threads on screws.
• White Delrin Shim 4mm x 2pcs are used to lower the gap during installing on the rear side since the gap on rear arms is slightly wider than the front arms.
• Multiple positioning holes for dampers to adjust the angle.
• Adjusting the length of the suspension and the angle of the wheels, so that they can be more suitable for different ways of racing.
• The design has upgraded from crosshead design to CVD swing joint for stronger power transmission.
• Harden steel joint with alloy 6061 T6 body combination, with axle increased from 6mm to 8mm for stronger and more powerful use but maintain light in weight.
• Adjustable design with better suspension and durability.
• These parts are made to lengthen the chassis 20mm wider then factory to improve the stability of the chassis.

• Upper Arms 4Pcs
• Lower Arms 4Pcs
• CVD 4Pcs
• Hex Adapter 4Pcs
• Wheel Lock 4Pcs
• Turnbuckle 2Pcs
• Stainless Steel Pin 4x33 4Pcs
• Stainless Steel Pin 4x43 4Pcs
• Stainless Steel Flat Head Screw 3x8 12Pcs
• Stainless Steel washer 3m 12Pcs
• Stainless Steel Pin 4x38.5 4Pcs
• Stainless Steel Pin 4x63.5 4Pcs
• White Delrin Shim 4mm 2Pcs
• Stainless Steel Round Head Screw 3x20 6Pcs
• Stainless Steel Round Head Screw 3x18 2Pcs
• Set Screws 5x5 4Pcs
• 8x16x5 bearing 4Pcs
• 2.5x14.8 pin 4Pcs
• M4x2.5x17 Screw Pin 4Pcs

Original Name / Part No:

8929+8930+8950+8956+8948

Note: Due to the thickened axle, the bearings have also changed, suitable bearings are provided in the accessories.