Power HD Micro 1900MG 1.5kg Metal Geared Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The Power HD 1900MG is a high-quality servo with a torque of 1.5 kg-cm (20.8 oz/in) at 6.0V and a speed of 0.08 sec. It operates at a voltage range of 4.8 ~ 6.0 DC Volts and weighs only 14.0 g (0.49 oz). It features a DC Motor and Copper Gear Type.
- Micro sized for small applications
- Copper gears
- Fast speed of 0.08/sec at 6V
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
Servo Dimensions
- Total Height (A) = 30mm
- Body Width (B) = 23mm
- Below Mount (C) = 16mm
- Above Mount (D) = 14mm
- Total Length (E) = 32.5mm
- Total Width (F) = 12mm
- Torque(4.8V): 1.2 kg-cm (16.6 oz/in)
- Torque(6V): 1.5 kg-cm (20.8 oz/in)
- Speed: 0.11 sec (4.8V) | 0.08 sec (6V)
- Operating Voltage: 4.8 - 6V
- Weight: 14.0g (0.49oz)
- Bearing Type: N/A
- Motor Type: Brushed
- Operating Temperature: -20℃~60℃
- Refresh Rate: 50 Hz
- Size: 23.0x12.2x27.5mm (0.91x0.48x1.08 in)
| Description | QTY |
|---|---|
| Micro 1900MG 1.5kg Metal Geared Servo | 1 |
| Servo | |
|---|---|
| Servo Size: | Micro |
| Drive Motor Type: | Brushed |
| Gear Material: | Metal |
| Case Material: | Plastic |
| Waterproof Casing: | No |
| Rotational Degrees: | 120o (Normal) |
| Servo Spline Count: | 10 |
| Signal Type: | Analog |
| 4.8V Torque kg/cm: | 1.2 |
| 6.0V Torque kg/cm: | 1.5 |
| 4.8V Sec/60 Degrees: | 0.11 |
| 6.0V Sec/60 Degrees: | 0.08 |
| Input Voltage Range: | 4.8V,6V |
| "A" Measurement: | 30 |
| "B" Measurement: | 23 |
| "C" Measurement: | 16 |
| "D" Measurement: | 14 |
| "E" Measurement: | 32.5 |
| "F" Measurement: | 12 |
