Power HD Storm S50 Standard Brushless 50kg 8.4v Metal Geared Servo

Brand: Power HD | SKU: S50
3 in stock

$197.51

Description

 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Specifications
  • Torque(6.0V): 38.0 kg-cm ( 527.7 oz/in)
  • Torque(7.4V): 45.0 kg-cm ( 624.9 oz/in)
  • Torque(8.4V): 50.0 kg-cm ( 694.4 oz/in)
  • Speed: 0.15 sec (6.0V) │0.12 sec (7.4V) │
  • Speed: 0.10 sec (8.4V) │
  • Operating Voltage:6.0 ~ 8.4 DC Volt
  • Weight: 75.0 g (2.65 oz)
  • Bearing Type:Ball Bearing x 2
  • Motor Type:Brushless Motor
  • Gear Type:Titanium & Steel
  • Operating Temperature: -20℃~60℃
  • Working frequence:1520μs / 333hz
  • Size:40.7 x 20.5 x 38.6 mm ( 1.60 x 0.81 x 1.52 in)

Included items
Description QTY
Storm S50 Standard Brushless 50kg 8.4v Metal Geared Servo 1
Hardware Set 1
Decal Sheet 1
Power HD Storm S50 Brushless Servo Specifications
  • Total Height (A) = 44mm
  • Body Width (B) = 40.7mm
  • Below Mount (C) = 29mm
  • Above Mount (D) = 15mm
  • Total Length (E) = 54.2mm
  • Total Width (F) = 20mm
RC Hobby Servo Specifications

Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.

Specifications
Servo
Servo Size: Standard
Drive Motor Type: Brushless
Gear Material: Titanium & Steel
Case Material: Metal
Waterproof Casing: Yes
Servo Spline Count: 25
Signal Type: Digital
6.0V Torque kg/cm: 50
6.0V Sec/60 Degrees: 0.15
"A" Measurement: 44
"B" Measurement: 40.7
"C" Measurement: 29
"D" Measurement: 15
"E" Measurement: 54.2
"F" Measurement: 20
Reviews
Power HD Storm S50 Standard Brushless 50kg 8.4v Metal Geared Servo
1 reviews
Kurt Reichel
07/06/2021
Best servo I've ever owned! I would highly recommend this servo to anyone that is sick & tired of busting cheap servos. Very strong & very quick. Very impressive even running on 6.0v. I have all my servos running on 7.4v now so it is even better. Super quiet being brushless & very smooth not jittery at all.

Showing 1 to 1 of 1 (1 Pages)