Power HD W50-360 50KG 8.4V Brushless Metal Geared Winch Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The Power HD W50 High Voltage Servo feature all-aluminium housings, with high-power brushless motor as the core power, offering amazing torque output. American imported ST32-bit MCU control chip ensure superior servo performance.
Here's a nice over power winch.| Operating Voltage | 6.0v | 7.4v | 8.4v |
| Torque | 35.0 kg-cm / (486.1 oz/in) | 45.0 kg-cm / (625.0 oz/in) | 50.0 kg-cm / (694.4 oz/in) |
| Speed | 1.3 sec | 1.0 sec | 0.9 sec |
| Bearing Type | Ball Bearing x 2 | ||
| Motor Type | Brushless Motor | ||
| Gear Type | Steel | ||
| Working frequency | 1520?s / 333hz | ||
| Operating temperature | -20?~60? | ||
| Weight | 80 g (2.82 oz) | ||
| Size | 40.8 x 20.5 x 38.7 mm ( 1.60 x 0.81 x 1.52 in) | ||
- Total Height (A) = 43.6mm
- Body Width (B) = 40.8mm
- Below Mount (C) = 27.5mm
- Above Mount (D) = 16.1mm
- Total Length (E) = 53.7mm
- Total Width (F) = 20.5mm
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
| Servo | |
|---|---|
| Servo Size: | Standard |
| Drive Motor Type: | Coreless |
| Gear Material: | Steel |
| Case Material: | Aluminium |
| Waterproof Casing: | Yes |
| Rotational Degrees: | 360 |
| Servo Spline Count: | 25 |
| 6.0V Torque kg/cm: | 35 |
| 7.4V Torque kg/cm: | 45 |
| 8.4V Torque kg/cm: | 50 |
| 7.4V Sec/60 Degrees: | |
| 8.4V Sec/60 Degrees: | |
| Input Voltage Range: | 6V|7.4V|8.4V |
| "A" Measurement: | 43.6 |
| "B" Measurement: | 40.8 |
| "C" Measurement: | 27.5 |
| "D" Measurement: | 16.1 |
| "E" Measurement: | 53.7 |
| "F" Measurement: | 20.5 |
