Savox Standard 46kg 7.4v Metal Geared Waterproof Servo

Brand: Savox | SKU: SW-1212SG
1 in stock



 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

This waterproof, steel-geared servo is perfect for Monster Truck and most Scaler and Crawler applications where a slightly taller servo can be fitted. Precision steel gears, stump-pulling torque, and waterproof to IP67 standards (operates for up to 30 minutes in water up to 3 feet deep).


  • Center aluminum with nylon composite top and bottom case
  • Operates directly on 7.4v without the need for an eternal BEC
  • Precision ball bearings

SAV-SW-1212SG Servo Specifications
  • Total Height (A) = 50.15mm
  • Body Width (B) = 40.6mm
  • Below Mount (C) = 33.35mm
  • Above Mount (D) = 12.8mm
  • Total Length (E) = 54mm
  • Total Width (F) = 20.7mm
Servo Size: Standard
Drive Motor Type: Brushless
Gear Material: Steel
Case Material: Metal
Waterproof Casing: Yes
Rotational Degrees: 120o (Normal)
Servo Spline Count: 25
Signal Type: Digital
6.0V Torque kg/cm: 46
6.0V Sec/60 Degrees: 0.17
"A" Measurement: 50.15
"B" Measurement: 40.6
"C" Measurement: 33.35
"D" Measurement: 12.8
"E" Measurement: 54
"F" Measurement: 20.7
Savox Standard 46kg 7.4v Metal Geared Waterproof Servo
0 reviews