TLR 1/10 22 5.0 DC 2WD Race Roller RC Buggy

Brand: TLR | SKU: TLR03012
1 in stock

$537.06

Shop Parts
Description
Overview

Assembled to our TLR Race Team's Factory Specifications, the Team Losi RacingĀ® 22 5.0 DC Race Roller: 1/10 2wd Buggy will get any racer off on the right foot and competing for podiums quickly! Factory-built and pre-assembled as a Race Roller chassis, new drivers can start racing in less time. Just add your preferred electronics, tyres, and paint to make this Race Roller as unique as you. The 22 5.0 DC Race Roller has a combination of features second-to-none, including low maintenance gear differential, G3 12mm big bore shocks, revamped steering geometry, and so much more. Whether the terrain is dirt or clay, the 22 5.0 DC Race Roller is at home on the racetrack and poised for the podium.

TLR 22 5.0 DC Race Roller RC Buggy
Race Roller

Factory Built as a Race Roller Chassis, just install the electronics, mount the preferred tyres, paint the body, and the 22 5.0 DC Race Roller will be ready to hit the track and collect podiums!

TLR 22 5.0 DC Race Roller Low Maintenance Gear Differential Heavy Duty Slipper Differential
Low Maintenance Gear Differential

Optimised for reduced maintenance, the 22 5.0 DC Race Roller includes TLR's metal version gear differential, which is ultimately reliable and uses silicone fluid to adjust performance.

Super Heavy Duty Slipper (SHDS)

The slipper is optimised with all new slipper plates, slipper pads, spring, spur gears, and an all-new top shaft. The new top shaft uses a sturdy M4 lock nut. The new slipper pads allow for spur gears sized 69T to 81T, reduced slipper pad area provides a more linear slip through the throttle application, and a thicker slipper plate keeps consistent pressure across the surface of the slipper pads.

TLR 22 5.0 DC Race Roller VHA Rear Hubs Adjustable Inner Rear Pivots
VHA Rear Hubs and Adjustable Inner Rear Pivots

The 22 5.0 DC Race Roller includes Inner Rear Pivots with roll centre, track width, anti-squat and toe adjustment paired with the Variable Height Axle (VHA) rear hubs, which also give more roll centre and axle height adjustment. This is the most adjustable rear suspension TLR has ever produced.

TLR 22 5.0 DC Race Roller Revamped Steering Geometry G3 12mm Big Bore Shocks
Revamped Steering Geometry

The 22 5.0 is the best 2WD Team Losi Racing has ever created with the most significant improvement coming from the steering geometry. Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle, give the 22 5.0 DC Race Roller a significantly smoother steering feel, especially off-centre and high speed, while increasing low-speed steering for tighter tracks and 180s.

G3 12mm Big Bore Shocks

The G3 shocks give plush handling and consistent, leak-free bleed like the Gen II shocks, but with some long-anticipated ease of use improvements. The pistons are now secured by screws, new shock caps and shock bodies increase the spring collar height by 3mm to accommodate lower ride heights, new eyelets and spring cups provide -3mm, 0mm and +4mm spring cup off-sets and paired with all-new eyelets will never pop off with the screw in feature. Revised shock balls slide smoothly and easily into the front arms and the new eyes are made in two lengths to switch between different heights.

TLR 22 5.0 DC Race Roller Laydown Configuration
Laydown Configuration

The laydown 3-gear transmission moves the motor forward by 20mm+ to a more centralised location. The benefit is a chassis that drives much flatter and carries more corner speed.

TLR 22 5.0 DC Race Roller Milled 2.0mm Aluminium Chassis
Milled 2.0mm Aluminium Chassis

Maximizing the flex characteristics for all surfaces, the 2.0mm thick chassis give the right about of flex and rigidity for smooth corning, optimised balance, and bounce-free landings.


Features
  • Pre-Assembled Race Roller
  • Low Maintenance Gear Differential
  • Adjustable Rear Hubs and Inner Rear Pivots
  • G3 12mm Big Bore Shocks
  • Revamped Steering Geometry
  • Super Heavy Duty Slipper (SHDS)
  • 2.0 Milled Aluminium Chassis
  • 22 5.0 Body
  • TLR Front Wing Included
  • Diff Height Adjustment
  • Front Roll Centre Adjustment
  • 3-position Front Camber Block
  • New Battery Hold Down
  • Optimised Composites
  • TLR 6.5" Rear Wing
  • Built-In Motor Fan Mount
  • Laydown Configuration
  • All Metric Hardware
Specifications
  • Approximate Assembly Time: 1-3 hours
  • Ball Bearings: Full set, rubber sealed
  • Battery: Sold Separately
  • Body: 22 5.0 cab forward, 0.7mm thick
  • Charger: Sold Separately
  • Chassis: 0.078" (2mm) thick aluminium
  • Completion Level: Roller
  • Differential: Metal gear, adjustable height
  • Drivetrain: 2WD
  • Front Track: 9.8" (248.5mm)
  • Power Type: Electric
  • Gear Pitch: 48P
  • Gear Ratio: 2.43:1
  • Product Height: 5.8" (147 mm)
  • Product Length: 15" (381 mm)
  • Product Width: 9.8" (249 mm)
  • Radio: Sold Separately
  • Rear Track: 9.8" (248.5mm)
  • Receiver: Sold Separately
  • Scale: 1/10
  • Servos: Sold Separately
  • Shock Type: Oil-filled
  • Spur Gear: 72T, 78T
  • Suspension: Lower A-Arm, Upper Adjustable Link
  • Vehicle Type: Buggy
  • Wheelbase: 11" (279 mm)
Included items
Description QTY
1/10 22 5.0 DC Race Roller 1
Product Manual 1
Required items (not included)
  • Radio System
  • Motor
  • Electronic Speed Control
  • Servos
  • LiPo Battery
  • Charger
Specifications
Car
Assembly Type: Roller
Max LiPo Power: 3S (11.1v)
Size (Scale): 1/10
Skill Level: Expert
Power Source: Electric
Chassis Type: Buggy
On/Off Road: Off Road
Drivetrain: 2WD
Factory specs
Max LiPo power:
Battery connector:
Front shock oil:
Rear shock oil: 32.5w
Rear differential oil: 7000cSt
Spur gear: 72T 48dp,78T 48dp
Wheel hex size: 12
Reviews
TLR 1/10 22 5.0 DC 2WD Race Roller RC Buggy
0 reviews