Maverick MS-06WR Standard 6kg 6v Servo w/ Horn
Maverick MS-06WR Standard 6kg 6v Servo w/ Horn
Water-resistant 6v servo with 5.5kg-cm torque and 25T spline, suitable for use in rain, snow, and puddles.
This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles).
- Operating Voltage: 6v
- Speed: 0.22 sec/60 degrees
- Torque: 5.5kg-cm
- Servo Spline: 25T
- Weight 45g
- 1x MS-06WR Standard 6kg 6v Servo w/ Horn
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
-
Total Height (A)
- 42mm
-
Body Width (B)
- 40mm
-
Below Mount (C)
- 27mm
-
Above Mount (D)
- 15mm
-
Total Length (E)
- 55mm
-
Total Width (F)
- 20mm
-
Height (A)
- 42mm
-
Body Length (B)
- 40mm
-
Bottom to Under Mount (C)
- 27mm
-
Top to Under Mount (D)
- 15mm
-
Length (E)
- 55mm
-
Width (F)
- 20mm
-
SizeConventionally sized servo names
- Standard
-
Gear Material
- Plastic
-
Waterproof Casing
- Splash Proof
-
Servo Spline Count
- 25Tooth
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 5.5
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- .22
-
Signal Type
- Digital