Power HD 6001HB Standard 6.7kg Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
- Total Height (A) = 43.5mm
- Body Width (B) = 40.7mm
- Below Mount (C) = 27mm
- Above Mount (D) = 16mm
- Total Length (E) = 54.5mm
- Total Width (F) = 20.5mm
Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.
| Servo | |
|---|---|
| Size: | Standard |
| 6V Torque kg/cm: | 6.7 |
| Servo Spline Count: | 25tooth |
| Gear Material: | Plastic |
| Waterproof Casing: | No |
| Signal Type: | Analog |
| Case Material: | Plastic |
| Rotational Degrees: | 120° (Normal) |
| Total Height: | 43.5mm |
| Body Length: | 40.7mm |
| Bottom to Under Mount: | 27mm |
| Top to Under Mount: | 16mm |
| Total Length: | 54.5mm |
| Total Width: | 20.5mm |
1 out of 5 stars
2 out of 5 stars
3 out of 5 stars
4 out of 5 stars
5 out of 5 stars
5 out of 5 stars
Best bang for your buck servo! Perfect for 1/10 applications such as a Short Course Truck or Stadium Truck! For the price, you get A LOT of speed and a decent amount of power to turn any 1/10 wheel.
