Power HD T70 70KG 8.4V Brushless Metal Geared Standard Servo
$170.84
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
The Power HD T70 High Voltage Servo feature all-aluminium housings, with high-power brushless motor as the core power, offering amazing torque output. American imported ST32-bit MCU control chip ensure superior servo performance. The T70 is ideal for large truggy, rock crawler and 1/5th scale cars.
If you need something with a little less torque, the T50 is ideal for 1/8th nitro off-road.- Total Height (A) = 43.5mm
- Body Width (B) = 41mm
- Below Mount (C) = 27.5mm
- Above Mount (D) = 16.0mm
- Total Length (E) = 54.0mm
- Total Width (F) = 20mm
In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.
| Servo | |
|---|---|
| Size: | Standard |
| 6V Torque kg/cm: | 70 |
| Servo Spline Count: | 25Tooth |
| Gear Material: | Steel |
| Waterproof Casing: | No |
| Signal Type: | Digital |
| Drive Motor Type: | Brushless |
| Case Material: | Aluminium |
| Rotational Degrees: | 120° (Normal) |
| Total Height: | 43.5mm |
| Body Length: | 41mm |
| Bottom to Under Mount: | 27.5mm |
| Top to Under Mount: | 16.0mm |
| Total Length: | 54.0mm |
| Total Width: | 20mm |
There are no reviews for this product yet.