Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Specifications
ROV-63049 RS-2160D Servo Specifications
Total Height (A)
63.1mm
Body Width (B)
66.1mm
Below Mount (C)
40mm
Above Mount (D)
23.1mm
Total Length (E)
81.7mm
Total Width (F)
29.9mm
Servo
SizeConventionally sized servo names
1/5
Gear Material
Metal
Servo Spline Count
15Tooth
Waterproof Casing
No
Case Material
Plastic
Height (A)
63.1mm
Body Length (B)
66.1mm
Bottom to Under Mount (C)
40mm
Top to Under Mount (D)
23.1mm
Length (E)
81.7mm
Width (F)
29.9mm
Drive Motor Type
Brushed
Rotational Degrees
120° (Normal)
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline