&nbspServos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

The Savox SB-2267SG Plus stands out as a high-torque, steel-geared, digital, low-profile servo boasting an all-black finish for a stealthy look in RC cars. It serves as an ideal upgrade for standard, plastic-geared servos providing limited torque.

• Leading edge digital servo technology

• Strong 3-Pole Brushed motor

• Accurate and fast response

• Ball bearings provide fluid and unrestricted movement

• Precision Steel gears are durable and long lasting

• Spline size: 25T Spline

• Servo Technology: Digital High Voltage

• Operating Voltage (V): 7.4V - 8.4V

• Motor Type: Brushless Motor

• Weight: 57g

• Gear Type: Steel Gears

• Servo Case: Black Plastic

• Torque @ 7.4v: 25.0kg-cm (347.2 oz-in)

• Torque @ 8.4v: 32.0kg-cm (444.4 oz-in)

• Speed @ 7.4v: 0.08 sec/60 deg

• Speed @ 8.4v: 0.065 sec/60 deg

• Connector type: JR/Futaba

• Total Height (A) = 26.05mm

• Body Width (B) = 40.8mm

• Below Mount (C) = 17.1mm

• Above Mount (D) = 8.95mm

• Total Length (E) = 54mm

• Total Width (F) = 20.2mm

In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.