Traxxas Standard Waterproof 5.76kg Servo
Traxxas Standard Waterproof 5.76kg Servo
 Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
TRA-2056 Servo SpecificationsTotal Height (A) = 42.5mm
Body Width (B) = 40.2mm
Below Mount (C) = 27mm
Above Mount (D) = 15.5mm
Total Length (E) = 54.8mm
Total Width (F) = 19.7mm
-
Servo Spline Count
- 25Tooth
-
Total Length
- 54.8mm
-
Total Width
- 19.7mm
-
Bottom to Under Mount
- 27mm
-
Top to Under Mount
- 15.5mm
-
Total Height
- 42.5mm
-
Body Length
- 40.2mm
-
Rotational Degrees
- 120° (Normal)
-
6V Sec/60 DegreesSeconds per 60 degrees of rotation
- 0.23
-
Signal Type
- Analog
-
Case Material
- Plastic
-
6V Torque kg/cmKilograms of torque at 25mm away from the center of the spline
- 5.76
-
Gear Material
- Plastic
-
Waterproof Casing
- Yes
-
Drive Motor Type
- Brushed
-
SizeConventionally sized servo names
- Standard
Parts
1 out of 5 stars
2 out of 5 stars
3 out of 5 stars
4 out of 5 stars
5 out of 5 stars
5 out of 5 stars
1 out of 5 stars
2 out of 5 stars
3 out of 5 stars
4 out of 5 stars
5 out of 5 stars
1 out of 5 stars











/fit-in/300x200/production/HOBBY/image/3a56cc8f30a06a396fe53361b0f3553f-1621028007.jpg)
