Traxxas Sub Micro 2.5kg Servo

Brand: Traxxas | SKU: 2060

discontinued

write a review

Shop replacement & upgrade parts for this model

Shop Parts

Loading compatibility information...

Description

&nbspServos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Traxxas 2060 Servo Specifications

Total Height (A) 27mm
Body Width (B) 22.2mm
Below Mount (C) 14.5mm
Above Mount (D)12.5mm
Total Length (E) 29.7mm
Total Width (F) 11.9mm

Specifications

Servo

Height (A): 27mm
Body Length (B): 22.2mm
Bottom to Under Mount (C): 14.5mm
Top to Under Mount (D): 12.5mm
Length (E): 29.7mm
Width (F): 11.9mm
Size Conventionally sized servo names: Sub Micro
Gear Material: Plastic
Waterproof Casing: No
6V Torque kg/cm Kilograms of torque at 25mm away from the center of the spline: 2.52
6V Sec/60 Degrees Seconds per 60 degrees of rotation: 0.2
Signal Type: Analog
Case Material: Plastic
Rotational Degrees: 120° (Normal)