HSP 1/10 Grampus Electric Brushless 4WD RTR RC Buggy
FU_00.jpg "Fujitsu 1.5v AA Alkaline Batteries 4Pcs")
Finally, a car that ticks all the boxes without breaking the bank!
Drive for longer than 20 minutes with the included 7.4v 3500mAh LiPo battery and use the included G.T. Power B3 fast charger to charge it back up in just over 2 hours.
The perfect RC buggy for intermediate hobbyists or beginners that have the need for speed! Being 100% water resistant lets you drive rain hail or shine, enjoy the performance of the HSP Grampus when it suits you.
Check out the HSP 1/10 Grampus RC brushless buggy in action!
These days when you want speed, brushless is the only way. Inside this RC vehicle is a pre-installed, 3300Kv 540 sized brushless motor that can unleash a huge amount of power for high top speeds and is more efficient for longer run times.
Never strip gears again! These 0.6 Mod gears are perfectly matched up and have a protective guard that goes around them to keep the stones and gravel out.
The FlySky GT2 has a super long range of ~300 metres and comes with a built-in programmable fail-safe which means if it loses connection the vehicle will just roll to a gentle stop.
Maintenance is a breeze! Taking a differential out will only take 5 minutes with a basic Philips head screwdriver (only 5 screws).
Hobbies Direct stocks all replacement HSP parts for this model to ensure you get back up and running in no time! Or if you want to hop up your ride check out the most popular upgrade parts below.
Quick charge times! With a 2.3 hour charge time you can spend less time waiting for them to charge and more time bashing! You always want to use a quality charger like the B3 to ensure a long lifetime for your battery and provide peace of mind while charging.
- Steel Spur Gear
- Steel Pinion Gear
- Steel Differential Gears
- 3300Kv Brushless Motor
- 60A Brushless ESC
- LiPo Battery Included
- G.T Power B3 1.5A Fast LiPo Charger
- All Standard & Optional Parts Available
- Length: 400mm (15.74")
- Width: 255mm (10.03")
- Height: 160mm (6.29")
- Weight: 1796g
- Wheel Base: 275mm (10.82")
- Ground Clearance: 26mm (1.02")
- Drivetrain: 4WD
| RC Car | |
|---|---|
| Max LiPo Power: | 2S (7.4v) |
| Completion: | Ready to Run |
| Scale: | 1/10 |
| Skill Level: | Intermediate |
| Power Source: | Electric Brushless |
| Chassis Type: | Buggy |
| On/Off Road: | Off Road |
| Drivetrain: | 4WD |
| Factory specs | |
|---|---|
| Battery connector: | |
| Max LiPo power: | |
| Front shock oil: | |
| Rear shock oil: | 32.5w |
| Front differential oil: | Grease |
| Rear differential oil: | Grease |
| Pinion gear: | 26T 0.6Mod |
| Spur gear: | 64T 0.6Mod |
| Wheel hex size: | 12 |
Double sided tape on the esc came off on first run, not a huge problem. Few rattles here and there but mainly play in the dogbones, couple of rubber o-rings sorted that out. On/off switch likes to switch off on rough terrain which is a pain if your smashing down a track and it’s a fair distance away.
I see these problems as no major fault of the car itself as I like to send it. Great intro car, just keep in mind potentially spending another $1-200 on upgrades to make it that bit more solid.
