Tamiya 1/14 Scania R470 Highline Electric RC Truck Kit
Tamiya proudly presents the R470 Highline, one of the trucks belonging to Swedish manufacturer Scania's International Truck of the Year 2005 award-winning R Series. Body features replica-quality realism and the chassis features numerous metal parts for the frame and suspension for an added sense of volume. Assembly of the 3-speed transmission is effortless, and when used with a 4-channel transmitter, it will give fans full control of realistic gear shift operations. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck. The interior and exterior of the fenders themselves have also been accurately modelled for the most realistic look possible. Kit-included coupler enables linkage with any of Tamiya's currently available 1/14 scale trailers, and the R470 is compatible with a wide range of Tractor Truck Option Parts as well.
Gear shifts can be fully controlled during driving for added realism.
Cabin tilts forward separately from the fenders, just like the full-sized truck.
The included 3 speed gearbox allows you to shift on the fly!
- Low (forwards and backwards)
- Medium (forwards and backwards)
- High (forwards and backwards)
The must have multi function unit gives your Tamiya 1/14 semi truck some attitude by lighting it up with LED lights (which work with the operation of the vehicle for example, when the truck is turning left the left indicator flashes), adding realistic vibrations (idle and starting vibrations etc), and of course, the sounds!
- 24 different sounds
- 9 different types of lights
- Vibrations synchronised with the motor output
- Length 452mm, Width 187mm, Height 293mm, Weight (without options) Approx. 3.2kg
- Wheelbase: 272mm
- Tread: 156mm (Front), 138mm (Rear)
- Chassis: Aluminum & Polycarbonate Resin Ladder Frame
- Suspension: Front/Rear Leaf Springs
- Caster Angle: 0°/0°(Front/Rear)
- Camber Angle: 0°(Front & Rear)
- Toe Angle: 0°(Front & Rear)
- Dampers: Aluminum Dummy Dampers (Front & Rear)
- Drivetrain: Rear Wheel Drive
- Transmission: 3-gear transmission (gear shifting operated via transmitter)
- Gear Ratio: (1st Gear) 32.49:1, (2nd Gear) 17.76:1, (3rd Gear) 10.66:1
- Diff. Gear: 3-bevel diff
- Motor: Type RS540
- Tire Width 22mm (Front & Rear)
- Tire Diameter 83mm (Front & Rear)
- Steering servo
- Shift servo (for changing gears)
- Remote controller - see below
- Battery
- Charger
- Paint - see below
- ESC (or the optional multi function unit)
- Optional: Tamiya semi truck multi function unit #56511
- Recommended Tools:
- Large Philips head screw driver
- Small Philips head screw driver
- Modelling knife
- Long nose pliers
- Side cutters
- Scissors
- Tweezers
- Plastic cement
- Instant cement
- Synthetic rubber cement
- File
Important: When you're choosing your remote controller for your Tamiya semi truck, you need to figure if you want to use a MFU (Multi Function Unit). Your choice is between an analog or digital trimmed 4ch radio.
If you plan on using your Tamiya semi without an MFU, you can use either analog or digital.
If you plan on using your Tamiya semi with an MFU, you can only use an analog remote controller like the Tamiya Attack 4YWD.
How can I tell if my remote has analog or digital trim?
- Analog remote trims slide from one end to the other
- Digital remote trims are switches and click in either direction (no sliding)
| Car | |
|---|---|
| Assembly Type: | Kit |
| Size (Scale): | 1/14 |
| Skill Level: | Expert |
| Chassis Type: | Truck |
| Factory specs | |
|---|---|
| Max LiPo power: | |
| Battery connector: | |
| Front shock oil: | |
