Videos

Savox Orange Aluminium 45kg 8.4v HV Standard Coreless Digital Servo

Brand: Savox | SKU: SV-1270TG-PLUS

sold out

write a review

$147.72

Delivery Options

Description

Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.

Built for demanding applications, the Savox SV-1270TG Plus servo delivers exceptional speed, high torque, and smooth operation. Ideal for 1/8 scale vehicles, it also features soft start and Sanwa SSR compatibility for enhanced control and convenience.

How To: Install a Servo

In this video, Hamish gives a step-by-step guide on installing a Servo and how to avoid stripping your servo gears.

Features

Water resistant design so you can use in any conditions
Aluminium Centre case helps protect and keep the servo cool
Features soft start and Sanwa SSR compatibility

Features super strong Titanium gearing for peak durability
Suitable for large scale aeroplanes and 1/8 vehicles
Uniquely anodised in orange

Specifications

Spline size: 25T Spline
Servo Technology: Digital
Operating Voltage: 7.4V - 8.4V
Motor Type: Coreless Motor
Weight: 64g
Gear Type: Titanium Gears
Refresh Rate: 333 Hz

Servo Case: Orange Aluminium Middle w/ Plastic Top & Bottom

Torque @ 7.4V: 40 kg-cm (555.5 oz-in)

Torque @ 8.4V: 45 kg-cm (624.9 oz-in)

Speed @ 7.4V: 0.11 sec/60 deg

Speed @ 8.4V: 0.10 sec/60 deg

Connector type: JR/Futaba

Servo Specifications

Total Height (A) = 37.2mm
Body Width (B) = 40.3mm
Below Mount (C) = 24.4mm
Above Mount (D) = 12.8mm
Total Length (E) = 54.0mm
Total Width (F) = 20.2mm

Included items

Description	QTY
Savox Orange Aluminium 45kg 8.4v HV Standard Coreless Digital Servo	1

-->

Specifications

Servo

Total Width: 20.2mm
Servo Spline Count: 25Tooth
Top to Under Mount: 12.8mm
Total Length: 54mm
Body Length: 40.3mm
Bottom to Under Mount: 24.4mm
6V Sec/60 Degrees Seconds per 60 degrees of rotation: 0.11
Total Height: 37.2mm
Case Material: Metal
Rotational Degrees: 120° (Normal)
Signal Type: Digital
6V Torque kg/cm Kilograms of torque at 25mm away from the center of the spline: 45
Gear Material: Metal
Waterproof Casing: Splash Proof
Size Conventionally sized servo names: Standard

Reviews

Be the first to write a review for this product.