Pro-Line 3.8" Dumont Paddle Tyres on Black Raid Rims - Glued Wheels 2Pcs
Pro-Line 3.8" Dumont Paddle Tyres on Black Raid Rims - Glued Wheels 2Pcs
Pro-Line Dumont 3.8" extreme paddle tires pre-mounted on Raid Black 8x32 Removable Hex Wheels — for sand and snow on 1:8 Monster Trucks (pair).
- Extreme 3.8" paddle tires for sand and snow — large offset V-shaped tread for maximum roosting power
- Pre-mounted on Raid Black 8x32 Removable Hex Wheels with replaceable hexes
- 17mm wide offset 8x32 hexes and M3 wheel hex hardware included
- Wheel made from high-strength, durable DuPont Nylon material
- Made in the USA, since 1982
This is a pair of pre-mounted Dumont 3.8" Tires on Raid Black 8x32 Removable Hex Wheels. Pro-Line’s all-new Dumont 3.8" tires have been designed from the ground up to sling sand and snow further than ever before.
The Dumont 3.8" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter.
The Dumont 3.8" tires come pre-mounted on the Raid 3.8" Removable Hex Wheel, the next generation 3.8" wheel design from Pro-Line. The Raid 3.8" wheels use a unique 8x32 interlocking hex design secured to the wheel by 8 M3 screws spaced 32mm across, allowing damaged wheel hexes to be replaced without replacing your glued tires. Hexes are included and also available separately (6345-00).
Tire Features:
- Extreme Paddle Tires for Sand and Snow
- Latest Paddle Tire Technology – Large Offset V-shaped Tread
- Pro-Line P-L Logos Embedded into Tire Carcass
- Made from Very Stiff and Long-lasting Paddle Tire Rubber
- Foam Inserts Included
- Made in the USA, since 1982
Wheel Features:
- Removable Hexes Allow you to Easily Replace Damaged Hexes
- 17mm Wide Offset 8x32 Hexes are Included
- Wheel Made from High-strength, Durable DuPont Nylon Material
- Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
- M3 Wheel Hex Hardware Included
- Made in the USA, since 1982
- Pre-Mounted Dumont 3.8" Paddle Tires on Raid Black 8x32 Removable Hex Wheels (2 pcs)
- 8x32 to 17mm Hex Adapters (2 pcs)
- M3 x 12mm long SHCS hardware (16 pcs)
Compatible vehicles (requires 17mm hexes):
- MAXX®
- E-REVO® 2.0
- SUMMIT®
- Tekno MT410
- ARRMA® Kraton™
- Other Monster Trucks with 17mm Hexes
Pro-Tip: When running in water, mud, or sand, foreign materials can enter the tire. If this occurs, foam inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside your tires.
-
Suited Vehicle Type
- Truggy, Truck
-
Suited Terrain Type
- Sand
-
Outer Diameter (mm)
- 184mm
-
Suited Rim Width (mm)
- 70mm
-
Fitment Method
- Glue
-
Hex Size
- 17mm
-
Suited Vehicle Type
- Truggy, Truck
-
Attachment Type
- Hex
-
Car Side Outer Diameter (in)
- 3.8in
-
Curb Side Outer Diameter (in)
- 3.8in
-
Car Side Outer Diameter (mm)
- 97mm
-
Curb Side Outer Diameter (mm)
- 97mm
-
Width
- 70mm
-
Tyre Attachment Method
- Glue