Power HD Standard HD-1501MG 17kg Metal Geared Servo
Brand: Power HD
|
SKU: HD-1501MG
Description
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Power HD HD-1501MG Servo Specifications
- Total Height (A) = 43.3mm
- Body Width (B) = 40.4mm
- Below Mount (C) = 26.6mm
- Above Mount (D) = 16.7
- Total Length (E) = 54.4mm
- Total Width (F) = 20mm
Learn how to install a steering servo correctly to increase steering performance, and avoid stripping your servo gears out.
Specifications
| Servo | |
|---|---|
| Servo Size: | Standard |
| Drive Motor Type: | Brushed |
| Gear Material: | Metal |
| Case Material: | Plastic |
| Waterproof Casing: | No |
| Rotational Degrees: | 120o (Normal) |
| Servo Spline Count: | 25 |
| Signal Type: | Analog |
| 6.0V Torque kg/cm: | 17 |
| 6.0V Sec/60 Degrees: | 0.16 |
| "A" Measurement: | 43.3 |
| "B" Measurement: | 40.4 |
| "C" Measurement: | 26.6 |
| "D" Measurement: | 16.7 |
| "E" Measurement: | 54.4 |
| "F" Measurement: | 20 |
Reviews
0 reviews
Related Products
