GPM Racing TRX4ZSP48 Interior for TRX-4 8pc set. Transparent in colour so users can paint different colours according to preference. The interior is directly mounted on the car shell. Suitable for Traxxas TRX-4 Defender.

• Step 1: Cut the transparent shell to size, trim edges, cut out the centre and seat parts, apply colour once trimming is complete. Remove any oil before colouring. Rear body post can be cut after colouring to provide more room.
• Step 2: Apply stickers according to corresponding positions. Install steering wheel, foot brake pedal, gear stick and other accessories. The steering wheel is movable — pay attention to installation direction.
• Step 3: Install the central part. Remove the front skid plates and original screws. Ensure it is level with the front gear when installing; tighten screws after adjustment.
• Step 4: Install the seats. Remove the rear skid plates and spare tire stabilizer. If the original spare tire stabilizer is needed, fix with a locknut.
• Step 5: Fix the centre part and seats with screws. Install the front wheel and skid plates. Raise the front and rear body posts on the original shell by one positioning hole. Each installation may vary — raise or lower the positioning hole if necessary.

• Interior Part – 1pc
• Sticker – 1pc
• Steering Wheel – 1pc
• Hand Brake – 1pc
• Glove Compartment – 1pc
• Gear Stick – 1pc
• Foot Brake Pedal – 1pc

This body shell comes completely UNPAINTED and may or may not require body post holes to be drilled. Only use a polycarbonate style paint such as the Tamiya PS series to finish these bodies, as standard paints will not adhere and/or cause damage to the body shell's surface.