This upgrade set lowers the chassis and widens the wheel track to suit higher speed drives. Upgrading to this product lowers the centre of gravity to suit a more high-speed drive on flat surface roads.

• Shocks made thicker than original with different spring coils: Gold (included) 2.6mm, Silver (separate) 2.2mm for more powerful and stable use.
• Shocks are shorter than original: Front 75mm, Rear 80mm to help lower the vehicle (can go as low as 6mm from ground).
• CVD made with hardened steel 45# combined with aluminium 6061 T6 body — sturdy and lightweight.
• Spring steel hex widener adds 3mm on each side of the wheel (+6mm in total); widened wheel track increases stability.
• Metal rim with rubber tyre makes the wheel travel direction more precise.
• Anodised in Green.
• Genuine GPM Racing Product.

• 2x Front Wheel
• 2x Rear Wheel
• 2x Front CVD Driveshafts
• 2x Rear CVD Driveshafts
• 4x Spring Steel Hex
• 2x Front Shocks
• 2x Rear Shocks
• 2x Short Spring
• 2x Long Spring
• 4x 3x14mm Fine Thread Button Head Screw
• 6x 3x16mm Fine Thread Button Head Screw
• 4x 3x6x2.5mm Aluminium Collar
• 4x 3mm Collar
• 4x 3mm Washer
• 2x 3x6x8mm Aluminium Collar
• 4x 3x6x12mm Aluminium Collar
• 2x 3x6x16mm Aluminium Collar
• 4x 3x20mm Fine Thread Button Head Screw
• 2x 3x25mm Fine Thread Button Head Screw
• 4x 4x2.5x12mm Screw Pin
• 4x 4x2.5mm Silicone O-Ring
• 2x 3x3mm Screw Shaft

When used on Slash: as the body is lowered, the shell will hit the tire. Use aluminium collars between the body post and the shock mount to support the shell. Use different size collars for different shock angle adjustment. When the body is at the highest, use front 8mm with rear 12mm collars. When the body is at the lowest, use front 12mm with rear 16mm collars.