Maverick Strada DC RC Drift Car Electric Brushless 4WD 1/10 Scale RTR
- 1/10
- 4WD
- RTR
- Brushless
Part no. MV12626
Recommended products
Overview
The Maverick Strada DC Brushless is a fully-featured drift racing car with a large foam front bumper to protect the body and chassis, plus a high-downforce saloon-style body with an extra-tall rear wing. Stylish black wheels are wrapped with hard plastic drift tyres, and locked front and rear diffs make it extra-easy to drift on any paved surface.
The Strada Brushless line-up features a brushless electronics group including the powerful MM-22BL 3215KV brushless motor fitted with a black laser-etched case and 4mm gold-plated plugs, plus the strong MSC-30BL-WP brushless waterproof ESC. Each Strada Brushless vehicle features a moulded tub chassis providing durability and a stable, tough platform for a strong 4WD shaft drivetrain. Pre-built oil-filled shock absorbers and dual-wishbone independent suspension front and rear give supreme confidence on all driving surfaces. The MS-22 servo controls steering through a dual-point system with an integrated servo saver to protect against crash damage.
The Strada 4WD drivetrain uses efficient ball bearings throughout for maximum runtime and efficiency, and features a moulded gear cover to keep dirt and debris away from the gears. Front and rear gear differentials easily transfer the motor's power to the pre-mounted tyres at all four corners.
Features
- MM-22BL 3215KV brushless motor with 4mm gold-plated plugs
- MSC-30BL-WP brushless FWD/Brake/Reverse Waterproof ESC
- LiPo-compatible speed controller (see manual for instructions how to change between NiMH & LiPo modes) with LiPo safety cut-off
- MBP-26 3000mAh Ni-MH battery
- MS-22 high-strength steering servo
- MTX/MRX-243 2.4GHz transmitter and receiver with built-in failsafe
- Moulded tub chassis with optimized weight distribution
- Fully adjustable suspension
- Tough battery strap
- 4 oil-filled rebuildable shocks with coil-over springs
- Aluminum gold anodized shock tops
- Fully independent double wishbone suspension
- Tough C-hub front steering knuckles
- Tough efficient 4WD shaft drivetrain
- Drivetrain fully equipped with ball bearings
- Aluminum gold anodized upper deck
- Aluminum gold anodized lightweight center shaft
- Pre-cut body factory-finished
- Fully adjustable turnbuckles all round
- Large foam front bumper
- Twin-point bellcrank steering with integrated servo saver
- Moulded protective gear cover
In the box
- 1x Maverick 1/10 Strada DC Electric Brushless 4WD RTR RC Drift Car
- 1x 7.2V 3000mAh Ni-MH Battery Stick Pack
- 1x Multi-Region Wall Battery Charger
You'll need
- 4 x AA Batteries
Highlights

Strada DC brushless drift car overview
The Strada DC Brushless is a fully-featured drift racing car with a large foam front bumper, high-downforce saloon-style body, and an extra-tall rear wing.

Brushless motor and waterproof ESC detail
The MM-22BL 3215KV brushless motor with 4mm gold-plated plugs and MSC-30BL-WP waterproof ESC provide the power behind the Strada DC.

Dual-wishbone suspension and chassis detail
Pre-built oil-filled shock absorbers and dual-wishbone independent suspension front and rear give you supreme confidence on all driving surfaces.
Specifications
| Length | 470mm (18.5") |
|---|---|
| Width | 200mm (7.87") |
| Height | 125mm (4.91") |
| Wheelbase | 255mm (10.0") |
| Weight | 1.45kg (3.19lbs) |
RC Car
| Scale | 1/10 |
|---|---|
| Max LiPo Power | 3S (11.1v) |
| Completion | Ready to Run |
| Skill Level | Beginner |
| Power Source | Electric Brushless |
| Chassis Type | Drift |
| On/Off Road | On Road |
| Drivetrain | 4WD |
Factory Specs
| Battery Connector | Tamiya |
|---|
Parts
Top parts for this Maverick Strada DC RC Drift Car Electric Brushless 4WD 1/10 Scale RTR
Shop all partsReviews
No reviews yet. Own one? Tell other hobbyists what it's like.
Questions & Answers
Have a question, or an answer? Our team and other owners both reply.
No questions yet. Ask the first one.





































.webp)










