UDI Panther RC Drift Car Electric Brushless 4WD 1/16 Scale RTR
UDI Panther RC Drift Car Electric Brushless 4WD 1/16 Scale RTR
1/16 scale 4WD RTR brushless drift car with integrated ESP gyro, two sets of tyres, waterproof electronics, and included Li-Ion battery.
- Brushless motor for high performance
- Integrated ESP (Electronic Stability Program) with gyroscope for yaw correction
- High speed and drift modes with two interchangeable tyre sets included
- Waterproof and dustproof ESC and steering servo
- Includes Li-Ion battery (7.4V, 1200mAh) and USB charger — ready to run
The UDI Panther Brushless RC Drift Car is a 1/16 full-proportion high-performance 4WD racing car with integrated ESP (Electronic Stability Program) that effectively corrects yaw, making it easier to control. It features a brushless motor, a 4CH 2.4G integrated control ESC, waterproof and dustproof design, and is equipped with two sets of different tyres — standard tyres and drift tyres — to adapt to different roads. Angel Eyes headlights are included and the light can be controlled. The car comes with a USB charger, integrated chassis and diffuser, and front and rear bumpers for double protection. Two new striking colour schemes are available.
Featuring ball bearings throughout the drivetrain, to minimise friction and maximise efficiency. This design not only improves mechanical power transmission but also reduces wear and tear on components, ensuring smooth operation and extended lifespan.
The vehicle features a high-strength nylon planetary differential that provides durability and wear resistance, enhancing stability during cornering. For even greater performance, the differential can be upgraded to a metal version (sold separately).
This RC car includes two sets of tyres, allowing you to customise its performance for different driving styles and surfaces. Enjoy high-speed racing with one set, and easily switch to the other set for thrilling drifts. This versatile feature enhances the car's adaptability and provides a more dynamic driving experience.
Enhance your driving experience with controller-activated headlights featuring three distinct lighting modes. Control the headlights directly from the transmitter, adding realism and visibility to your RC adventures.
The UDI Race Car features an Electronic Stability Program (ESP) that enhances control and prevents loss of traction. When the car experiences a slide or loss of control, the ESP system automatically corrects the car's attitude and direction, keeping it on track. The sensitivity of the gyro sensor can be adjusted or turned off using the ESP knob on the transmitter, allowing you to customise the level of assistance.
The chassis features a front bumper assembly with a sponge foam bumper for added protection during impacts. This durable bumper helps to absorb shocks and prevent damage to the front end of the vehicle, ensuring long-lasting performance and resilience.
This RC car includes a feature-packed transmitter with a range of functions for enhanced control and customisation. Adjust the steering range percentage, activate the Electronic Stability System (ESP) for improved handling, fine-tune steering trim, and control the headlights, all from the 4-channel transmitter. A speed switch allows you to adjust the car's top speed, and the out of control protection function makes it suitable for drivers of all skill levels.
Featuring an integrated gyroscope waterproof ESC with a 4Ch 2.4Ghz design. It offers Electronic Stability Program (ESP) functionality, low voltage cut-off, thermal overload protection, and adjustable settings for brake, BEC, LVC sensitivity, and reverse speed. This feature-packed ESC provides reliable performance and precise control in various conditions.
- High speed and drift modes by replacing included tyres
- Bright headlights and tail-lights
- ESP body electronic stability system with gyroscope
- Brushless motor
- Includes Li-Ion battery
- Ready to run
- 4CH 2.4G integrated control ESC — waterproof and dustproof design
- ESP (Electronic Stability Program) with low voltage cut-off and thermal overload protection
- Brake, BEC, LVC sensitivity, reverse speed, and motor timing settings
- Waterproof and dustproof steering servo — torque: 2.3 kgf·cm @6V; speed: 0.10 Sec/60° @6V; dimensions: 40×29.6×13.2mm
- Equipped with two sets of different tyres — standard and drift — changeable freely
- Angel Eyes headlights; light can be controlled
- USB charger with various charging methods
- Fully integrated chassis and diffuser for slick underside airflow
- Front and rear bumpers separating force from violent impact
- 2.4GHz racing wireless control system with ergonomic steering wheel
- 1x 1/16 Panther High Speed Off Road Drift Car
- 1x 2.4G Transmitter
- 1x Lithium-Ion Battery Pack
- 1x USB Charger
- 1x English Manual
- 4x Drift Tyres
-
Model
- UDI1602PRO
-
Scale
- 1/16
-
Drivetrain
- 4WD
-
Motor Type
- Brushless Motor
-
Battery Capacity
- 7.4V, 1200mAh
-
Running Time
- About 15 minutes
-
Transmission Distance
- About 60 metres
-
Completion Level
- Ready-To-Run
-
Drive Type
- Forward/Brake/Reverse
-
Differential
- Two oil-filled gear
-
Final Drive Ratio
- 6.05:1
-
Internal Gear Ratio
- 2.8:1.1
-
Pinion
- 16T
-
Spur Gear
- 38T
-
Gear Pitch
- 0.5/0.7/1.0MOD
-
Suspension
- Independent
-
Vehicle Type
- On-Road
-
Ball Bearings
- Full set
-
Front Track
- 101mm (3.98")
-
Rear Track
- 101mm (3.98")
-
Wheelbase
- 170mm (6.69")
-
Ground Clearance
- 10mm (0.39")
-
Product Length
- 300mm (11.81")
-
Product Width
- 150mm (5.91")
-
Product Height
- 100mm (3.93")
-
Product Weight
- 635.5g (1.4 lbs)
-
Power Type
- Electric
-
Approximate Assembly Time
- Less than half an hour
-
Scale
- 1/16
-
Max LiPo Power
- 2S (7.4v)
-
Completion
- Ready to Run
-
Skill Level
- Beginner
-
Power Source
- Electric Brushless
-
Chassis Type
- Drift, Car
-
On/Off Road
- On Road, Off Road
-
Drivetrain
- 4WD
-
Max LiPo Power
- 2S (7.4v)
-
Battery Connector
- JST
-
Pinion Gear
- 16T
-
Spur Gear
- 38T
-
Wheel Hex Size
- 9mm