ARRMA ADS-08 Micro Diff Locking Servo
Servos are powered by the ESC's output to the receiver. If you're using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience 'brown-outs' where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Overview:
This ADS-08 Diff Locking Servo Set contains one ADS-08 micro servo that is factory fitted with the diff locking actuator. The set also includes the diff locking ring that enables the differentials of your vehicles to be locked on-the-fly.
Also included in the set is a 150mm Servo extension lead for when the diff locking servo is installed in the front or rear diff case of your vehicle.
Features:
ADS-08 Micro servo - Pre-installed diff locking actuator - Diff Lock ring - 150mm Servo extension lead
Includes:
1 x ADS-08 Servo with locking diff mechanism installed
1 x 150mm Servo wire extension lead
1 x Diff locking ring
Requires:
This item is sold as a spare part for vehicles with the diff locking functionality, or as an upgrade part for vehicles that can have the diff locking functionality fitted.
To upgrade a vehicle that can have the diff locking functionality fitted you will need 3 x AR390103 and 1 x AR390160
| Servo | |
|---|---|
| Size: | Micro |
| Gear Material: | Plastic |
| Case Material: | Plastic |
| Rotational Degrees: | 120° (Normal) |
There are no reviews for this product yet.
