HPI Jumpshot ST Flux RC Stadium Truck Electric Brushless 2WD 1/10 Scale RTR - Blue
HPI Jumpshot ST Flux RC Stadium Truck Electric Brushless 2WD 1/10 Scale RTR - Blue
$720.01
$727.17
$474.65
$474.65
$484.11
$720.01
The HPI Jumpshot ST FLUX is a factory-built Ready-To-Run 1/10 2WD stadium truck powered by the FLUX MMH-4000 brushless motor and FLUX EMH-3S speed controller. It supports 2S or 3S LiPo packs (as well as 6- or 7-cell NiMH flat style stick packs), accessed from a hinged battery door underneath the chassis for fast battery changes. The Jumpshot ST FLUX is built on a Savage-style Twin Vertical Plate (TVP) lightweight aluminium chassis with electronics and battery boxes sandwiched between the plates for a super-stiff, centre-balanced design with simple maintenance and durable crash protection.
The Jumpshot FLUX line-up features new metal transmission gears — metal top and middle gears, a revised tooth profile for improved gear mesh and lower rolling resistance, a sealed oil-filled metal 4-bevel gear differential, a fully enclosed spur gear cover with rubber cap for slipper clutch access, and a metal motor mount plate insert — all inside a new protective rear gearbox cover. Up front, the V2 servo saver with stronger upper suspension links makes the front end extra-rugged. The water-resistant steering servo and waterproof ESC and receiver ensure the Jumpshot ST FLUX can be driven in conditions from dry and dusty to wet and muddy.
The Jumpshot ST FLUX is the Stadium Truck member of the latest instalment in the excellent Jumpshot dynasty.
The Jumpshot ST FLUX has been updated with a brand new look that is bright and sure to grab attention.
The Jumpshot ST FLUX is loaded with features that will keep you driving for hours.
Pick-up truck style body with the latest HPI graphics.
The Jumpshot ST FLUX is built like the legendary Savage, with a TVP (Twin Vertical Plate) lightweight aluminium chassis that runs from front to rear.
The FLUX MMH-4000 motor works with the robust FLUX EMH-3S speed controller so you can strap in your choice of 2S or 3S LiPo.
New metal Top, Middle and Differential Transmission Gears with revised tooth profile for improved gear mesh and lower rolling resistance.
The Jumpshot ST is equipped with long-stroke, oil-filled shocks just like you see on real stadium trucks.
The Jumpshot ST features a hinged battery door underneath the chassis, so you don't need to take the body off to change battery packs.
Rugged all-terrain tyres and extra-wide tyres let you roll over mud, snow, as well as over jumps and any obstacles.
The receiver is completely waterproof and enclosed within a protective box, just like the battery on the bottom of the chassis.
The Jumpshot ST FLUX is super-easy to drive and get familiar with — all you have to do is plug in the battery.
The Jumpshot ST FLUX drives and performs fantastic right out of the box.
The Jumpshot ST FLUX easily fits all popular battery sizes, from 6- and 7-cell flat style NiMH packs and even 2S and 3S LiPo packs.
- Factory-built Ready To Run 2WD stadium truck
- FLUX MMH-4000 brushless motor and FLUX EMH-3S 3S speed controller
- Tough aluminium TVP (Twin Vertical Plate) chassis design
- NEW: Metal Top & Middle Transmission Gears — revised tooth profile for improved gear mesh and lower rolling resistance
- NEW: Metal Differential — sealed oil-filled 4-bevel gear design
- NEW: Fully enclosed Spur Gear Cover with rubber cap for slipper clutch access
- NEW: Rear Gearbox with Metal Motor Mount Plate Insert
- Battery box fits 6- or 7-cell NiMH flat style stick packs and 2S & 3S LiPo packs
- Battery easily accessible from the bottom of the chassis via hinged door with metal clip
- Enclosed receiver box (waterproof)
- 2.4GHz radio system
- Oil-filled, threaded long-stroke shock absorbers — adjustable ride height
- Double-wishbone suspension design
- V2 servo saver with stronger upper suspension links
- Water-resistant steering servo
- Waterproof electronic speed controller
- Direct-link steering system
- Rear-wheel 2WD drivetrain
- Durable skid plates front and rear
- Rigid ribbed battery box door doubles as chassis skid plate
- Sturdy body mounts
- Standard 12mm hex hub wheel fitting
- Pick-up truck style body with the latest HPI graphics
- Large all-terrain tyres
- Silver 6-spoke wheels
- Complete set of ball bearings
- Scale: 1/10
- Assembly Level: Ready-To-Run
- Drivetrain: 2WD (rear wheel drive)
- Length: 420mm (16.5")
- Width: 315mm (12.4")
- Height: 190mm (7.48")
- Wheelbase: 295mm (11.6")
- Weight: 1.85kg (4.07 lbs)
- Motor: FLUX MMH-4000 brushless
- ESC: FLUX EMH-3S (supports 2S and 3S LiPo)
- Radio: 2.4GHz
- 1x 1/10 Jumpshot ST Flux RTR RC Stadium Truck
- 1x Radio Transmitter
- 1x Parts Bag
- 2x Allen Wrench Set
- 1x Cross Wrench
- 11.1V (3S) LiPo Battery & Compatible Charger
- 4x AA Batteries (for transmitter)
-
Scale
- 1/10
-
Max LiPo Power
- 3S (11.1v)
-
Completion
- Ready to Run
-
Skill Level
- Beginner
-
Power Source
- Electric Brushless
-
Chassis Type
- Stadium Truck
-
On/Off Road
- Off Road
-
Drivetrain
- 2WD
-
Max LiPo Power
- 3S (11.1v)
-
Battery Connector
- Deans
-
Rear Shock Oil
- 50w
-
Front Differential Oil
- 1000cSt
-
Centre Differential Oil
- 1000cSt
-
Rear Differential Oil
- 1000cSt
-
Pinion Gear
- 21T 48dp/0.5Mod, 23T 48dp/0.5Mod
-
Spur Gear
- 90T 48dp/0.5Mod
-
Wheel Hex Size
- 12mm
Parts
$8.28
$9.78
$30.07
$24.67
$9.78
$27.93
$8.90
$196.38
5 out of 5 stars
